Guest puttinjohn Posted April 13, 2012 Share Posted April 13, 2012 I am in need of a trunk handle, trunk support arms for a series 25 coupe. Would anyone out there know if the series 25 coupe is the same as the chevy coupe and would those support arms interchange? Any help out there with regard to my situation would be greatly appreciated. Thank You. Link to comment Share on other sites More sharing options...
Guest mikestaley Posted April 13, 2012 Share Posted April 13, 2012 can't answer interchange question, but while searching for pontiac parts myself i did notice 4 different ebay trunk handles...... i just typed in 1940 pontiac trunk handle and up they came.... i am new to this forum and to 40's pontiacs and imagine you have already checked out ebay.... but just in case i thought i'd offer my small 2 cents worth of knowledge. mike. Link to comment Share on other sites More sharing options...
poci1957 Posted April 13, 2012 Share Posted April 13, 2012 According to my notes the Model 25 Pontiac uses the A body as does Chevrolet. This means exterior ornaments are still probably unique to Pontiac but internal body hardware like the support arms will often interchange. No guarantee but looks like they are probably the same, good luck, Todd C Link to comment Share on other sites More sharing options...
Guest puttinjohn Posted April 13, 2012 Share Posted April 13, 2012 I kinda thought that. Again, I am not sure. Thanks for your effort, Todd, I do appreciate it. Also, I am in need of the hardware that attaches the hood latch to the under side of the hood, I have the Indian latch but am without the hardware and I don't know what it looks like. I also need hood springs and lower brackets that mount lower to the cowl. Any help with that would be deeply appreciated. Thank you again for your effort. John. Link to comment Share on other sites More sharing options...
Guest puttinjohn Posted April 13, 2012 Share Posted April 13, 2012 Mike, I just got done talking with Kelseys and explained my problem with the trunk handle. I have 3 trunk handles, two of which are short shafts, the third one, which, is the correct one is longer by about 1/2 to 3/4 of an inch. The other two don't work. Curt at Kelseys thinks I might have the wrong latch assembly on my coupe. I have to look into that yet. I appreciate your efforts, thanks for responding to my post. John Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now