bobcanuck Posted January 10, 2012 Share Posted January 10, 2012 One end mounts upon the carb, the other sits on a brace on the passenger side. Am I correct in thinking that it is actually a 2 piece assembly, the top comes off so that oil can be added to the segment mounted on the brace? If so, how in the name of goodness does one get the 2 pieces apart ...? I have tried a number of ways (rubber mallet etc) but no luck ... Bob Link to comment Share on other sites More sharing options...
dictator27 Posted January 11, 2012 Share Posted January 11, 2012 (edited) There should be a wing nut under the brace which screws onto a stud that goes right through the aircleaner and holds the whole assembly together. Loosen the carb end fist, remove the wing nut and hold the assembly together as you lift it off otherwise you'll spill the oil.Terry Edited January 11, 2012 by dictator27 (see edit history) Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now