Guest leftwing302 Posted November 10, 2011 Share Posted November 10, 2011 Im putting a new gas sending unit in my cleaned and coated tank.(I thank everyone for all the info on tank cleaning for my 1937 Plymouth) Of course my new unit (from Roberts Motor Parts) is a little different.There is an adjustment for arm length for the float.And there is an adjustment for how far the lower part of the unit sits in the tank.(No instructions with the sending unit). I want to get this right the first time,any help would be appreciated. Thanks Lew Link to comment Share on other sites More sharing options...
JACK M Posted November 10, 2011 Share Posted November 10, 2011 I just installed an aftermarket sender. It was adjustable in several ways.They had me measure the depth of the tank and divide that in half. This is where the pivot went. Then it is a matter of cutting the float rod in the right place.I am on here every morning and if you like I could send you the instructions. They are specific for the unit I am using but may be of help. Put a message here if you want this. Link to comment Share on other sites More sharing options...
Guest leftwing302 Posted November 10, 2011 Share Posted November 10, 2011 (edited) Thanks Jack, Please send the instructions,they are certainly more than I have now. Lew Edited November 11, 2011 by leftwing302 (see edit history) Link to comment Share on other sites More sharing options...
JACK M Posted November 11, 2011 Share Posted November 11, 2011 Hope these help. They are for an aftermarket sender. Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now