Sign in to follow this  
Joe47

Rear quarter window removal

Recommended Posts

I am having trouble with the passenger side rear quarter window. It sounds like the gear wheel is stripped . How do you remove , or what do you remove to get to the motor and window bracket ? Are the front window units the same as for the quarter units ? Does anyone know if there is a match for the unit from another Chrysler car. ? Thanks . Joe47 :confused:

Share this post


Link to post
Share on other sites

Hi

I just replaced mine. Lot of work to replace. Found a motor/regulator on E-bay for 200.00. you will need a manual because it's quite a time consuming job. Very tight fit. One clue is to remove rear speaker to access some of the bolts. Good luck.

Share this post


Link to post
Share on other sites

I was able to get the motor out . Hemi, you were right, a nasty job. One thing you don"t have to do is take the top cap off where the seat belt goes through. Where do you get a good motor . I found the part # for the pass/side front , from Cardone Inc. #42-406 . But no listing for the 1/4 window. Can they be the same part ? Anyone know ? On the motor is the name Rockwell part # looks like 400036 I'm not sure . Anyone know for sure ? I have a message in to a Rockwell distrib. with this info. Looks like my problem is the gear wheel which seems worn. Any help would be appreciated. Joe47

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
Sign in to follow this