AlanM Posted September 29, 2011 Share Posted September 29, 2011 These gaskets are McCord 6126A and there is also a number 26H6051 on them. Are they for Lincoln V-12 engines and are they the same for all years? Thanks in advance for your help. Link to comment Share on other sites More sharing options...
Waldren Posted September 29, 2011 Share Posted September 29, 2011 I have dealt with the V 12 motor since 1955 and all head gaskets interchange except the aluminum heads had felt not metal gaskets. Waldren Fort Myers,Fl Link to comment Share on other sites More sharing options...
AlanM Posted September 29, 2011 Author Share Posted September 29, 2011 Thanks for your response. Are these 6126A gaskets correct for the V-12? Link to comment Share on other sites More sharing options...
Tom_Overfield Posted September 29, 2011 Share Posted September 29, 2011 26H is a Lincoln number so I would have to say yes, Lincoln V-12 gaskets.Tom Link to comment Share on other sites More sharing options...
Guest noncompos Posted September 30, 2011 Share Posted September 30, 2011 1952 McCord gasket catalog B2 covering 1937-52 shows the 6126A for :Lincoln V12 (Zephyr, Cont'l, Custom)901 1936, HB 1937, 86H 1938, 96H 1939 (23/4x33/4=267.3 engine);06H 1940, 16H, 168H 1941, 26H, 268H 1942, 66h 1946, 76H 1947, 876H 1948 (all 27/8x33/4=292 engine).OE # shown is 26H-6051A (note the "A" not on yours??).ALSO SHOWS ANOTHER ENTRY: "Lincoln 12, Pass 12-136, 12-145 37-38 See Catalog "A" (which I do not have).My Motor Manual (covers 35-46) says the V12 136 and 145 1935-40 has a 31/8x41/2=414cid engine)OOPS" That Motor manual says the 26H and 268H 1942 and the Zeph/Cont'l 1946 have a 2.937 (15/16)x 33/4=305 engine.So looks like your gaskets fit some V12's...I'm a little curious about the "6051" "6051A" difference. Link to comment Share on other sites More sharing options...
peecher Posted September 30, 2011 Share Posted September 30, 2011 The 6051 head gasket was for the '36 to '39 Zephyr and the 6051-A was used for all years, '36 to '48. Suspect the 6051-A had a few enlarged water passages? Link to comment Share on other sites More sharing options...
AlanM Posted September 30, 2011 Author Share Posted September 30, 2011 I apologize to everyone for causing the confusion. The number on these gaskets does include the "A" at the end. It is 26H6051A. Thank you for all your help. Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now