Guest petritl Posted August 8, 2011 Share Posted August 8, 2011 (edited) I am replacing the auto transmission in my 1962 Chrysler 300 . When I crawled under the car to size up this job I ran into an issue.The torsion mount crossover passes under the transmission far enough forward that it doesn't look as the trans can be removed with the engine in the car and it didn't look as there was a removable center on the crossover.Can this be right; is there something I am missing? Tad Edited August 8, 2011 by petritl (see edit history) Link to comment Share on other sites More sharing options...
Guest petritl Posted August 9, 2011 Share Posted August 9, 2011 After cleaning a bunch of road grime I noticed the center of the crossover does unboly. 6 bolts in all Link to comment Share on other sites More sharing options...
keiser31 Posted August 9, 2011 Share Posted August 9, 2011 After cleaning a bunch of road grime I noticed the center of the crossover does unboly. 6 bolts in allI'm glad you found those because I was just about to tell you that they pretty much always have a removable cross member. Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now