WillBilly53 Posted May 15, 2011 Share Posted May 15, 2011 I thought I had posted this before but couldn't find it. Any ideas on how to remove the glass on a 1953 Clock? It's binded by the time setter shaft/mechanism. Or do I just need to take the whole clock apart? Link to comment Share on other sites More sharing options...
Fr. Buick Posted May 15, 2011 Share Posted May 15, 2011 If I recall correctly, there is an itty-bitty screw in the center of the time-setting nob. You will need a jeweler's screw-driver to get it out and remove the nob and the glass under it.Or try an eye-glasses repair screw driver. Link to comment Share on other sites More sharing options...
WillBilly53 Posted May 15, 2011 Author Share Posted May 15, 2011 Thanks Fr., but there doesn't seem to be a screw. I've attached some photos of what I'm working with. Link to comment Share on other sites More sharing options...
WillBilly53 Posted May 20, 2011 Author Share Posted May 20, 2011 bump.this is the last dash item I need to clean up and it's keeping me from installing the dash. anybody have any ideas on removing the glass? Thanks! Link to comment Share on other sites More sharing options...
old-tank Posted May 20, 2011 Share Posted May 20, 2011 Some of those knobs are pressed onto the shaft...and some pull off easier than others. You might consider a clock repair service if you cannot get it off easily. Link to comment Share on other sites More sharing options...
WillBilly53 Posted May 21, 2011 Author Share Posted May 21, 2011 right on. thanks old tank! Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now