Jim Posted March 28, 2011 Share Posted March 28, 2011 A few years ago I believe it was Padgett that noticed there was a problem in the manual about certain codes being wrong.I think it had to do with the book saying a particular wheel sensor was bad when actually it was a different wheel.Padgett or anyone else remember this situation?Jim Link to comment Share on other sites More sharing options...
KDirk Posted March 28, 2011 Share Posted March 28, 2011 Yup, Padgett posted that the codes listed in the manual were not referenced to the correct wheels. Apparently, every GM manual for a car with Teves had the same mistake as they were clearly all developed from the same erroneous list. Now to find the thread where he posted the correct order of codes to wheel. See if I can get the search facility to do it's thing.KDirk Link to comment Share on other sites More sharing options...
DAVES89 Posted March 28, 2011 Share Posted March 28, 2011 I think it was same end but opposite sides,ie Left Front was Right Front, Right Rear was Left Rear Link to comment Share on other sites More sharing options...
padgett Posted March 30, 2011 Share Posted March 30, 2011 AFAIR I just verified that the front was wrong (code said passenger side and was driver's), never got around to just pulling one by one and see which triggered. After that I started reading resistances at the connector in the trunk. Think the pin numbers were right. Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now