Jump to content

29 chrys wiper motor


Recommended Posts

Tim I called flicken they said they could build one for me, but I need to know the length of the shaft. My windshield is 3/4" thick could you help me with that, or how long the shaft is from the windshield to the end of the shaft. This car is a conv. and the wiper mounts on the inside of the windshield.

Mike

Link to comment
Share on other sites

Guest martylum

Hi-I'm going to try to upload a picture of what I think you need. The deck slats have an 8.5" screwspan and the saddles drop into keyholes on the outer 2 slats. The saddles have slots for the leather strap which is attached to your roadster top.

You mentioned roadster then convertible. These items are for a roadster.

I have the saddles and think I know where you can have the slats cast up.

marty@oldercar.com

Martin Lum

post-54166-143138344916_thumb.jpg

Link to comment
Share on other sites

Guest martylum

On the wiper motor-I measured the shaft length on my 30 Desoto roadster which takes the same motor-2" is what you need-1" for the width of the windshield frame and 1" protruding on the outside of the frame. I have some new chrome plated wiper arms which mount on the wiper shaft if you need.

Martin Lum

marty@oldercar.com.

Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
×
×
  • Create New...