Mssr. Bwatoe 129 Posted January 28, 2010 Hey 36-37 guys, I have a carb listed for a friend on the bay, I assumed 40-41 cause 3 bolt zephyr script. A "hepful" fellow advised me , (he was certain I was attempting to mis-represent) , the carb with the 16h tag was in fact for an earlier car with throttle push/instead of pull..or such..?? I am not familiar with 36-37's at all ..help me Phil..Peech..Bill.. Share this post Link to post Share on other sites
peecher 6 Posted January 29, 2010 (edited) Jeff, if the throttle is a pull to open type it will work with the early 36-37 LZ as they had the same linkage as the Fords. Those cars came with a Stromberg carburetor simular to the 97's but jetted a tad richer. The Parts book does show a Holley replacement for the 36-37's so Ford ( Lincoln) did supply an LZ Holley for that application and that may be what you have? One thing a little strange is that The base has a vacuum port presumably for the distributor? This feature appeared on late '41 Holley carbs as all early set ups have the vacuum port for the distributor in the manifold. I suppose it's possible that somewhere along the line the throttle shaft/arm may have been exchanged for the "Ford" type? Edited January 29, 2010 by peecher (see edit history) Share this post Link to post Share on other sites
Mssr. Bwatoe 129 Posted January 29, 2010 on the shelf for years....probably for that reason. Share this post Link to post Share on other sites
