kdml 44 Posted January 17, 2010 Share Posted January 17, 2010 The headlamap assemblies for my 65 were not completely hooked up when I bought it. When I pulled everything apart there was a spring on each side attached to the body, which I assume used to attach to somewhere on the headlamp assembly. I can't find a good diagram in the service manual. Can someone fill me in as to where the other side of these attach?ThanksDoug Link to post Share on other sites
1965rivgs 672 Posted January 22, 2010 Share Posted January 22, 2010 Hi Doug, The springs index into a notched area on the upper inside clamshell. They help the covers close completely. Hold the headlight assembly up to the fender and the point of attachment will be obvious. Tom Mooney Link to post Share on other sites
kdml 44 Posted January 22, 2010 Author Share Posted January 22, 2010 Thanks is this the right spot? Link to post Share on other sites
1965rivgs 672 Posted January 23, 2010 Share Posted January 23, 2010 Bingo!! Link to post Share on other sites
Recommended Posts
Archived
This topic is now archived and is closed to further replies.