Sign in to follow this  
Ozstatman

'41 Willys trans or parts wanted

Recommended Posts

G'day,

Posting this on behalf of a mate, Harvey, who doesn't have internet access. He's after parts for a '41 Willys preferably NOS or NORS if available, if not then good useable used parts. Looking for all the internals, or a good complete trans, or what have you got? Distance and shipping cost is a factor too being that we are in Australia but could be accommodated by shipping to a California location from which it would then be shipped to Australia if it's a problem. Let me know what you've got and I'll pass it on to Harvey.

Share this post


Link to post
Share on other sites

I have what I was told is a 37 or 38 willys transmission. Do you know what years interchange as far as the internals? I could take the internals out to make shipping easier if the stuff fits, and if you have a good case.

Share this post


Link to post
Share on other sites

G'day F&J,

I don't know if they interchange but I'll be seeing Harvey on Thursday and I'll ask him then. I'll post a reply here either way so we both know.

Share this post


Link to post
Share on other sites

Saw Harvey Thursday but, because it was a Packard event, never got around to talking about Willys trans. However, catch up again with him on Sunday, at another Packard event, and DEFINITELY will discuss this with him. Stay tuned.

Share this post


Link to post
Share on other sites
I have what I was told is a 37 or 38 willys transmission. Do you know what years interchange as far as the internals? I could take the internals out to make shipping easier if the stuff fits, and if you have a good case.

F&J,

Sorry for the delay in responding but finally caught up with Harvey. He tells me the 37 or 38 trans parts won't fit but thanks for your offer.

Share this post


Link to post
Share on other sites

I bought a Willys L134 engine that is supposed to come out of a 41 that included a transmission. It is like one I have never seen before. If you can send some pics and possible casting numbers of what you are looking for, I will take a look at what I have.

Share this post


Link to post
Share on other sites

G'day tankjeepman,

Sorry for the late response but just saw your post. With Christmas now upon us I probably won't catch up with Harvey until the new year but once I do I'll respond then. Thanks!

Share this post


Link to post
Share on other sites
........If you can send some pics and possible casting numbers of what you are looking for, I will take a look at what I have.
G'day again,

Spoke to my mate Harvey and he tells me the casting numbers on the trans are:

TA 84 G/1E and WG DIV

He also wanted to stress that he's after a trans for a Willys car and NOT a Jeep which are completely different.

Please let me know if these match what you have and then we can go from there.

post-52046-143138152941_thumb.jpg

post-52046-143138152943_thumb.jpg

Edited by Ozstatman
Added pictures (see edit history)

Share this post


Link to post
Share on other sites

Hello Down Under! Is that an ECHOOoooo I'm hearin'? Anyhow, let Harvey know that I have a "used" but not abused 1940 Willys Trans with floor shift that I may sell or trade. It came out of my Speedway Coupe. MAHALO!

Share this post


Link to post
Share on other sites

G'day Willys77,

Sounds interesting, just phoned Harvey but he'd like some more info on the trans before we go much further. Can you take the top off the trans and take some close up pic's of the gears, also some general pic's of the condition of the trans? Might be easier to email the pic's to me ozstatman@gmail.com and I can then print them out and show them to Harvey. BTW - Are the numbers in the pic's above on your trans? And where are you located in the US?

Share this post


Link to post
Share on other sites

First of all I am in a bit of a hurry so I apologize i really dint read all of this discussion, but if your looking for willys parts check this site. I have had a lot success here. GOOD LUCK!

Share this post


Link to post
Share on other sites

HI --- From memory that gearbox has the spiral cut gears on1st and reverse idler gears and output shaft which are hard to obtain.

If you have access to jeep gears they will fit the box except the output shaft because the spline is 1 inch dia were the jeep is 1-1/4 dia

find an earlier shaft from a late 39 -40 you could have all new internals. There are a few jeep parts places here in AUS

RON

Share this post


Link to post
Share on other sites

G'day Ron,

Always good to have another Aussie on board. And thanks for the info, I'll pass it on to Harvey. Saying that I believe he's already found a couple of other trans's and is OK now.

Again thanks.

Share this post


Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...
Sign in to follow this