Jump to content

'54 322 Crankshaft


stealthbob

Recommended Posts

Will a crankshaft from a '56 322 fit my '54 and it's '54 Dynaflow transmission?

I have been told by a trusted guy who knows his 56 Buick's that it won't mate well with the 54 Dynaflow but wanted to ask just in case as I have a possible deal lined up and I need a crank for my 54.

Thanks

Link to post
Share on other sites

I've always thought the cranks were the same in all 322's and 264's for that matter with exception of engines that received 3 speeds. A Dynaflow crank can be fitted with an adapter bushing to allow it to be used on a 3 speed. I think the crank you're looking to buy is a Dynaflow isn't it. Should fit...here's what the parts book says

but please confirm this with someone else though!

C.T. = Conventional transmission IE 3 speed

post-31987-143138114473_thumb.jpg

post-31987-143138114477_thumb.jpg

Link to post
Share on other sites

My Buick parts manual lists the crankshaft as: '53-'56 all V8 40,50, and 60 series as part #1318491--note:on'54-'56C.T.(Standard transmission), use one #1161771 brg.&adapter. cl.gr.pilot. The '56 crankshaft should work. If it comes out of a stickshift, you'll just have to remove the adapter and pilot bearing from the rear hub of the crank. to work with the Dynaflow.

kaycee

Link to post
Share on other sites

Archived

This topic is now archived and is closed to further replies.

×
×
  • Create New...