Guest duksters Posted August 21, 2009 Share Posted August 21, 2009 Hi i would like to buy aprox 10 or any quantity 63-64 horseshoe moulding ( on 1/4 panel) clips they are pushed into the holes in the body to hold the moulding on. contact duksters@aol.com Link to comment Share on other sites More sharing options...
Patrick91914 Posted August 21, 2009 Share Posted August 21, 2009 Hi i would like to buy aprox 10 or any quantity 63-64 horseshoe moulding ( on 1/4 panel) clips they are pushed into the holes in the body to hold the moulding on. contact duksters@aol.comI believe these are available at Cars, Inc., www.oldbuickparts.com Link to comment Share on other sites More sharing options...
Guest duksters Posted August 21, 2009 Share Posted August 21, 2009 they are in some cars catalogs but they are not available. some times when the moldings are removed they come off with them attached. If anyone has a set of moldings they probably have a few clips thanks Eric Link to comment Share on other sites More sharing options...
johnrex Posted August 21, 2009 Share Posted August 21, 2009 The last time I checked with Cars, they had no stock and didn't expect to get anymore. I did buy some from:Chuck Close811 Oceanhill DriveHuntington Beach, Calif.92648714-553-8111 cell714-969-9161Good luck! Link to comment Share on other sites More sharing options...
Guest REX STALLION Posted August 22, 2009 Share Posted August 22, 2009 Can some one post a picture of these clips? Perhaps I can come up with a solution. I`m thinking we could make them out of Lexan by heating up a metal probe (similar in size to the tabs on the horseshoe molding) and melting in a recess in the Lexan . The clips could be applied with a marine adhesive (sikaflex is a good one) Lo tech Lo buck Link to comment Share on other sites More sharing options...
gungeey Posted August 22, 2009 Share Posted August 22, 2009 vacuum hose that fits tite on the spades Link to comment Share on other sites More sharing options...
Guest duksters Posted August 23, 2009 Share Posted August 23, 2009 i'll try to post a picture of the clip tomorrow Thanks Eric Link to comment Share on other sites More sharing options...
BadgerRivFan Posted August 23, 2009 Share Posted August 23, 2009 Another potential source often recommended by RivNut is Mr. G's...Mr. G's Enterprises - FastenersNot sure if they have them, but worth checking out. Link to comment Share on other sites More sharing options...
Guest duksters Posted August 23, 2009 Share Posted August 23, 2009 Here is a bad picture of the clip as an attachment. I couldn't figure out how to post it Eric Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now