Jump to content

1960 buick bucket seats+225 fender trim


tailfins
 Share

Recommended Posts

  • 2 weeks later...

Good Luck on the seats . I see them on Ebay from time to time - same seats for the Pont. and Cad . If you are going to use the correct center console be aware that the width of the console is different between the Invicta and the Electra . I can tell by the amount of pleats in the vinyl . l think the Invicta had five and the electra had seven . I found the above info to be true for my 61 and I would guess it would be the same for the 60 . After a couple of years of looking I found mine in Colorado . If you would like pics of mine email me direct.

Link to comment
Share on other sites

  • 3 years later...
  • 4 months later...
Good Luck on the seats . I see them on Ebay from time to time - same seats for the Pont. and Cad . If you are going to use the correct center console be aware that the width of the console is different between the Invicta and the Electra . I can tell by the amount of pleats in the vinyl . l think the Invicta had five and the electra had seven . I found the above info to be true for my 61 and I would guess it would be the same for the 60 . After a couple of years of looking I found mine in Colorado . If you would like pics of mine email me direct.

Just reading this now, and felt obliged to respond. The difference in console is not between Invicta and Electra as Dick suggests.... It is between 60 and 61. The 61 console is narrower.

Link to comment
Share on other sites

  • 1 month later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share

×
×
  • Create New...