Jump to content

Starter replacement.


padgett

Recommended Posts

Just replaced the starter in the 'vert. No big but like the FSM says there are (or should be) four screws holding the plastic cover on that take a 10 mm socket. Two are visible from underneath, one faces the fan and holds the wire bundle. The other is in the cove between the engine and the trans. I used a 8" wobble extension and a stubby flex ratchet.

No need to remove the covers, just move out of way. Be careful not to hit the oil level sender.

Otherwise just the two Mutt'n'Jeff bolts (15mm socket) and the wiring. I use anti-seize on everything.

Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
×
×
  • Create New...