6ball Posted September 9, 2008 Share Posted September 9, 2008 Does anyone know if you can put an aftermarket steering wheel on an 89 Reatta? I have a Grant banjo style with a walnut grip that would look great in my car ( it it fits ) Link to comment Share on other sites More sharing options...
DAVES89 Posted September 9, 2008 Share Posted September 9, 2008 Should be no problem as you don't have an airbag to contend with. Link to comment Share on other sites More sharing options...
padgett Posted September 10, 2008 Share Posted September 10, 2008 Anyone know what is required to replace an airbag wheel with "something else" ? Link to comment Share on other sites More sharing options...
DTakas Posted September 11, 2008 Share Posted September 11, 2008 (edited) ----- Edited January 2, 2019 by DTakas (see edit history) Link to comment Share on other sites More sharing options...
Ronnie Posted March 30, 2009 Share Posted March 30, 2009 <div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: 6ball</div><div class="ubbcode-body">Does anyone know if you can put an aftermarket steering wheel on an 89 Reatta? I have a Grant banjo style with a walnut grip that would look great in my car ( it it fits ) </div></div>Here are photos of DAVES89's steering wheel. Link to comment Share on other sites More sharing options...
padgett Posted March 30, 2009 Share Posted March 30, 2009 That is a nice looking wheel - is that an 88 hood badge in the center ? Link to comment Share on other sites More sharing options...
Guest Kitskaboodle Posted March 31, 2009 Share Posted March 31, 2009 I have done this very swap.I think the 90/91 wheel is unsightly. So...I put one from an 88 on my 90. No problems whatsover. Kit Link to comment Share on other sites More sharing options...
padgett Posted March 31, 2009 Share Posted March 31, 2009 So did I. Biggest problem was tucking the 4.1 ohm resistor (3.3 should work also) and spade connectors behind the lock plate. Link to comment Share on other sites More sharing options...
DAVES89 Posted March 31, 2009 Share Posted March 31, 2009 I got the wheel off a 88 customized Suburban. I went on the internet and bought a large pin. Nic knows which one I got. It was not the hatpin that is offered on ebay as that one is too small. It was a direct fit. My next choice on a wheel would be one out of a Lumina. Link to comment Share on other sites More sharing options...
padgett Posted March 31, 2009 Share Posted March 31, 2009 Guess I am wierd, I like the stock wheel (88-89 one, do not care for explosives in front of my face). 1 Link to comment Share on other sites More sharing options...
DAVES89 Posted March 31, 2009 Share Posted March 31, 2009 I enjoy the stock wheel as well. I am just not willing to spend $250.00 to get one recovered. That is why I brought up the alternatives. Link to comment Share on other sites More sharing options...
Guest PontiacDude210 Posted July 30, 2014 Share Posted July 30, 2014 Sorry for the zombie thread here, I wanted to be clear on something though. The resistor you used was a 3.3ohm and it is across the 2 wires in the yellow housing that trigger the airbag? Is there any risk of fire from doing this? I assume the airbag circuit is not constantly hot. Link to comment Share on other sites More sharing options...
padgett Posted July 31, 2014 Share Posted July 31, 2014 a) yes is a sensor, only goes full hot if supposed to deploy & then will bw limited to under 5A. Link to comment Share on other sites More sharing options...
Guest PontiacDude210 Posted July 31, 2014 Share Posted July 31, 2014 I'm not seeing much as far as 3.3ohm resistors, seeing tons of 3.3Kohm resistors. Should I be worried about the volt/watt rating on the resistor? Link to comment Share on other sites More sharing options...
jbeary Posted August 1, 2014 Share Posted August 1, 2014 Try 3300 ohms. Shouldn't have a problem with a typical 1/2 watt. Kits or Padgett, any suggestion on the wattage? Even if you used a 1/4 watt, if the resistor burned up, it'd probably only be due to a collision that would have tripped the bag. Link to comment Share on other sites More sharing options...
jonlabree Posted August 1, 2014 Share Posted August 1, 2014 Find a radio shack and buy the correct resister. 3.3 to 4. ohm or the error light will stay on. Link to comment Share on other sites More sharing options...
Guest PontiacDude210 Posted August 2, 2014 Share Posted August 2, 2014 My question was not pertaining to whether to sub in the wrong resistor or not. My question was, when Padgett says 4.1 ohm, is he referring to 4.1kohm(4100 ohms) or actually 4.1 ohms? 4.1 actual ohms is almost no resistance. Jbeary says to try a 3300 ohm, or 3.3kohm. Link to comment Share on other sites More sharing options...
jonlabree Posted August 2, 2014 Share Posted August 2, 2014 No one put a K behind any suggestions. We ALL mean 3.3 to 4.4 OHMS. Link to comment Share on other sites More sharing options...
Guest PontiacDude210 Posted August 2, 2014 Share Posted August 2, 2014 Try 3300 ohms. Shouldn't have a problem with a typical 1/2 watt. Kits or Padgett, any suggestion on the wattage? Even if you used a 1/4 watt, if the resistor burned up, it'd probably only be due to a collision that would have tripped the bag.That's all I was wondering about. Having worked on electronics before, 3.3 ohms seemed low, but not knowing anything about automotive sensors, I had no idea. I was just making sure I knew what I needed for sure before driving into radio shack from the middle of absolutely nowhere. Thanks for the help. Link to comment Share on other sites More sharing options...
jonlabree Posted August 2, 2014 Share Posted August 2, 2014 I'm afraid that all of them "Radio Shacks" have moved out to the boone docks. Link to comment Share on other sites More sharing options...
Guest PontiacDude210 Posted August 3, 2014 Share Posted August 3, 2014 If all them Radio Shacks had moved to the boondocks, they might be within an hour drive from me. I said I was coming from the middle of nowhere, not going to. But thank you anyway, for all your help. Link to comment Share on other sites More sharing options...
jbeary Posted August 3, 2014 Share Posted August 3, 2014 Ya jeez sorry bout the extra three zeros there. 3.3k would be real high and probably wouldn't do anything much. 3.3 - 4 ohm is about what a 4ohm speaker would measure. That's passing more current than a 3.3k. I don't think you'll have luck at rat shack finding such a high valued resistor but they aren't scarce. If anyone in town sells electronic parts try there first but you can also get these online. Parts-express has them here: https://www.parts-express.com/33-ohm-1w-flameproof-resistor-10-pcs--003-3.3. I haven't done this swap myself but I have never been steered wrong by these guys and it seems very straight forward. One question I have is; can this be done at the connector under the dash or does it need to be tucked behind the horn button? Personally I'd rather do this under the dash. Probably can find a 4 ohm load wire wound at rat shack to boot Link to comment Share on other sites More sharing options...
Guest PontiacDude210 Posted August 3, 2014 Share Posted August 3, 2014 I would be inclined to put one in under the dash, just being that I will probably be the last owner of my Reatta due to miles and am not concerned with retaining original wire clips. And behind the horn seems kinda cramped. Link to comment Share on other sites More sharing options...
Guest PontiacDude210 Posted August 6, 2014 Share Posted August 6, 2014 Done, with a black Z34 wheel. And working fine. Here's an idea though. Instead of tucking the resistor behind the lock plate, go under the dash. Pull the male end of that connector from a donor car and splice in your resistor there. That way, no cutting on the car and it is plug and play. Link to comment Share on other sites More sharing options...
Ronnie Posted August 6, 2014 Share Posted August 6, 2014 Done, with a black Z34 wheel. And working fine. Here's an idea though. Instead of tucking the resistor behind the lock plate, go under the dash. Pull the male end of that connector from a donor car and splice in your resistor there. That way, no cutting on the car and it is plug and play.Do you have photos of how to do that? Link to comment Share on other sites More sharing options...
Guest PontiacDude210 Posted August 6, 2014 Share Posted August 6, 2014 I did not photo document because I can't post pix from mobile and where I am, regular internet is not easy to come by. I can give you a quick description though. There's a coupling below the dash near the steering column with a pair of wires in yellow shrink wrap on the male end marked SiR. The yellow shrink wrapped end goes up the steering column to the airbag. I would recommend taking the male end and a few inch pigtail from a donor Reatta or Riv. Load up some shrink wrap on one side of the pigtail, solder in your resistor, shrink wrap over it to prevent exposed leads, then plug that into the car side(female) of the wire harness. Done. Link to comment Share on other sites More sharing options...
Ronnie Posted August 7, 2014 Share Posted August 7, 2014 Thanks for posting your instructions. I was hoping for photos to go with them so I would be able to make a tutorial to add to Reatta Owners Journal. I have an '88 but your instructions here might help someone needing to replace an airbag wheel. Link to comment Share on other sites More sharing options...
jbeary Posted August 7, 2014 Share Posted August 7, 2014 @Pontiac Dude: I'm glad you tried it this way so I know what I'm up against when I do this. Where did you end up getting the resistor from? Did you end up using a 3.3 ohm? Here's the original steering from the grand national. I pulled it out of the attic tonight hoping for much worse but this doesn't look as bad as the 91's. This was pulled at 60k and replaced with an oem wheel that I practically stole when ebay was in its infancy. Since the grand national has 95k and hasn't been driven in the past 7 years, the steering wheel is about the best looking part on the car. Here's a spare, yoohoo. I like Padgett's thought about avoiding something approaching 25 years old blowing up in your face. And because I already have this wheel I've decided to work on this as a replacement for the wheel for the medium beechwood one in the 91. The 89's wheel is still really nice, nicer than this grand national wheel so I'm not going to attempt that swap, that and it's just plain goofy to start with a blue color and try to go to tan anyway. Since I bought all that Leatherique stuff, I'm hoping to strip this down and do a color change. I'll do a tutorial of that as well the connector to jump the air bag. I took my airbag out because I was freaking out over my busted horn buttons. More to follow. Link to comment Share on other sites More sharing options...
Guest PontiacDude210 Posted August 7, 2014 Share Posted August 7, 2014 I got my resistor, a 3.3 ohm, from an electronics supplier on Amazon. Pm me your mailing address and I'll send you one, I bought a pack of ten and only used 2. Broke the first one by mistake due to clumsiness. The hardest part will either be pulling the wheel or tucking the clip on the wheel end somewhere safe. I removed mine because I don't plan on selling my old Reatta. Ever. When it dies it'll be a parts car for the next one. I concur wholeheartedly, freaks me out sitting behind a 24 year old explosive charge. Link to comment Share on other sites More sharing options...
DAVES89 Posted August 9, 2014 Share Posted August 9, 2014 (edited) I did not photo document because I can't post pix from mobile and where I am, regular internet is not easy to come by. I can give you a quick description though. There's a coupling below the dash near the steering column with a pair of wires in yellow shrink wrap on the male end marked SiR. The yellow shrink wrapped end goes up the steering column to the airbag. I would recommend taking the male end and a few inch pigtail from a donor Reatta or Riv. Load up some shrink wrap on one side of the pigtail, solder in your resistor, shrink wrap over it to prevent exposed leads, then plug that into the car side(female) of the wire harness. Done.Just got back from Gibson's and the harness is just as you described. Removed the kick panel. Looked for yellow wires, pulled them down, found the connector and snipped it out. When/if I do a steering wheel swap I will be ready. I am looking for a wheel, I have one that is leather one that is pretty nice [see the first page of this post] also am leaning towards a Lumina wheel [it is simulated leather] or will watch out for a Regal wheel [they are leather]. BTW how about some postings from guys and their steering wheel swaps? Edited August 9, 2014 by DAVES89 (see edit history) Link to comment Share on other sites More sharing options...
zoltanb Posted August 10, 2014 Share Posted August 10, 2014 Here is mine 1 Link to comment Share on other sites More sharing options...
jbeary Posted August 10, 2014 Share Posted August 10, 2014 WOW! Very nice Zoltanb. Where's the "R" Reatta emblem from? Looks to be made of metal. Is that something oem? Link to comment Share on other sites More sharing options...
zoltanb Posted August 10, 2014 Share Posted August 10, 2014 The wheel is from an 84 riviera, it only came with gray leather so I dyed it blue, swaped the rivi logo from a reatta horn button. I really like the wood and the class that it gives the car. I have had many compliments on it. Thank you for yours Link to comment Share on other sites More sharing options...
wws944 Posted August 10, 2014 Share Posted August 10, 2014 Though it doesn't bother me that much, a lot of folks don't like the looks of the two-spoke airbag wheel - yet might be reticent to remove the airbag capability, It is, after all, a safety item that we hope will never be needed. But if it is needed, one would be glad it is there. With this in mind, I've sometimes wondered about retrofitting a later airbag steering wheel. The two spoke wheel and the various airbag modules under the dash cross to many other GM cars of the era. So it seems pretty feasible.Around '93 or '94 Buick switched to a four spoke design that seems like it would match the curves of the '90-'91 instrument panel pretty well. In fact, the '93 Lesabre could come with either the two-spoke or four-spoke wheel. Then there is a later four spoke wheel that is fairly contemporary in appearance. In '98 GM switched to their "Gen 2" airbag system, and the steering wheel mounts differently. So it is likely that '97 is the limit of interchangability.Has anyone looked into such a swap? Link to comment Share on other sites More sharing options...
DAVES89 Posted February 22, 2016 Share Posted February 22, 2016 Bringing up an old topic, but I found a wheel like the one Zoltan bought [see post 31]. I will be installing it in the 'vert this spring. Mine has maroon leather trim. I think it will be a nice change. Already bypassed the warning light circuit. I got a harness from a Riv out at Gibson's and istalled the resistor into that. Now I am plug n play and can switch back anytime as the 'vert's original harness is still there and intact. Link to comment Share on other sites More sharing options...
Ronnie Posted February 22, 2016 Share Posted February 22, 2016 Bringing up an old topic, but I found a wheel like the one Zoltan bought [see post 31]. I will be installing it in the 'vert this spring. Mine has maroon leather trim. I think it will be a nice change. Already bypassed the warning light circuit. I got a harness from a Riv out at Gibson's and istalled the resistor into that. Now I am plug n play and can switch back anytime as the 'vert's original harness is still there and intact. I like my stock tan wheel but I wish I had accepted that wheel you offered me when you stopped by my house. It had big molded grips for your hands and it just fit me. I think you probably gave it to Mc_Reatta. Do you remember what it was off of? Link to comment Share on other sites More sharing options...
DAVES89 Posted February 22, 2016 Share Posted February 22, 2016 (edited) I do, it was the Lumina steering wheel. I just got back from Gibson's and there were a couple out there. Two really nice ones for sure a maroon one and a black one. Ronnie if you go to post #5 I have this wheel and it is leather and available to you. Edited February 22, 2016 by DAVES89 (see edit history) Link to comment Share on other sites More sharing options...
DAVES89 Posted March 12, 2016 Share Posted March 12, 2016 Bringing up an old topic, but I found a wheel like the one Zoltan bought [see post 31]. I will be installing it in the 'vert this spring. Mine has maroon leather trim. I think it will be a nice change. Already bypassed the warning light circuit. I got a harness from a Riv out at Gibson's and istalled the resistor into that. Now I am plug n play and can switch back anytime as the 'vert's original harness is still there and intact.I did the swap today. It looks great, even my wife likes it! Where Zoltan's is blue leather, mine is maroon. Pictures coming soon. It really isn't plug and play on the 1990/91 as the air bag has to be removed and the lead wire up from the column has to be cut. I am OK with that as it won't go back in my lifetime of owning the car. Link to comment Share on other sites More sharing options...
Ronnie Posted March 12, 2016 Share Posted March 12, 2016 (edited) I did the swap today. It looks great, even my wife likes it! Where Zoltan's is blue leather, mine is maroon. Pictures coming soon. It really isn't plug and play on the 1990/91 as the air bag has to be removed and the lead wire up from the column has to be cut. I am OK with that as it won't go back in my lifetime of owning the car. This is a photo of Dave's new steering wheel. Edited March 20, 2016 by Ronnie (see edit history) Link to comment Share on other sites More sharing options...
Machiner 55 Posted March 14, 2016 Share Posted March 14, 2016 I'm not really a fan of the "woodgrain" dash panels but the addition of the wood steering wheel makes it work for me. John F. Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now