Mike Key St. Lou Posted July 31, 2008 Share Posted July 31, 2008 on my 2.2 turbo 1989 i replaced the acumulator, bled brakes, and the red brake light kept coming on very faintly took to a brake specialist who ran a series of computer test. was informed by him just a flaw in design. light will go out when i pump brakes aprox. 10 times for awhile. then comes on faintly again. fuses and box not over heating or acumulator both new. brakes work great! that light being on even faintly bothers me. any sugestion's whole system was replaced three years ago! help! Link to comment Share on other sites More sharing options...
Guest mtworkshop Posted July 31, 2008 Share Posted July 31, 2008 Go to the four way connector at the base of the proportioning valve and clean the contacts (the one that connects the four wheel sensors). You will find that there is a locking mechanism that locks the connector to the valve block. If that connector is clean check all the connectors from the four wheels where the sensor comes from the wheel to the harness. Good hunting.Mike Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now