arnulfo de l.a. Posted July 2, 2008 Share Posted July 2, 2008 I'm about to change the fuel pump on my 65 rivi gs(425ci).Anything i should know before taking on this task?Also need to replace my muffler.I would like to put something that would give it a low roar,nothing too loud.I was considering glass packs.Any suggestions?THANK YOU,ARNULFO Link to comment Share on other sites More sharing options...
Bill Stoneberg Posted July 2, 2008 Share Posted July 2, 2008 I have heard good thing from the Flowmasters.... Link to comment Share on other sites More sharing options...
gungeey Posted July 4, 2008 Share Posted July 4, 2008 Arnulfo, Two bolts, buddy, no sweat. Just find the low spot on the pump eccentric with a few taps of the key it'll slide in like your on a date with Suzy Rottencrotch, happy 4th, Steve Link to comment Share on other sites More sharing options...
RivNut Posted July 4, 2008 Share Posted July 4, 2008 Arnulfo,Flowmaster's #42582 is a crossflow dual inlet/dual outlet design with an inlet and an outlet on each end. Both inlets and outlets are 2.5". The overall lenght is 24". It would require the addition of some extra pipe, but it would fit in the original space.Ed Link to comment Share on other sites More sharing options...
arnulfo de l.a. Posted July 4, 2008 Author Share Posted July 4, 2008 thanks for the help guys! i will definetly look into the flowmster you mentioned ed.that was a big help on cranking the motor to find the low spot on the cam steve.thanks again fellas.arnulfo Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now