Auto Start Posted June 23, 2008 Share Posted June 23, 2008 I am working on a 1966 Lincoln Continental Convertible, the body and engine is in fine shape. The car was bought in Arizona and is virtually rust free, except for the inside. The car was stored for many years with the top up and folded down into the trunk. Seats are in terrible shape but I have them out and at the upholster shop.My problem is water must have sat inside the vehicle for long periods of time and all the relays and window switches are rusted totally. I am looking for these parts, any ideas or suggestions.Thanks in advance.Auto Start.....972-436-8111autostart@msn.com Rob Link to comment Share on other sites More sharing options...
Barry Wolk Posted June 23, 2008 Share Posted June 23, 2008 There is a guy by the name of John Cashman that goes around the country fixing slabsides. He's the renowned expert on these and Skyliners, since they used virtually the same mechanism.You should go to http://thelincolnforum.net for lots of helpful information about these cars. Do a search for John Cashman's name and I'm sure you'll find a way to get ahold of him. Link to comment Share on other sites More sharing options...
tbirdman Posted June 23, 2008 Share Posted June 23, 2008 Since the Continental top was also close to the T-Birds, I would try someone like this T-Bird parts supplier Birds Nest Link to comment Share on other sites More sharing options...
Barry Wolk Posted June 23, 2008 Share Posted June 23, 2008 I believe the relay rack has one or two more relays than the T-bird. I believe someone was working on an electronic version that didn't require any maintenance. Some of our club members have replaced their relays with off-the-shelf "ice-cube" relays designed to work on 12-volts. There are also heavy duty relays used in the air bag systems used on lowriders.The way the relays are mounted in my non-convertible Lincolns they shouldn't be damaged internally. The relay cover acts as a weather shield. The biggest problem I've encountered with top and window switches is dirty or mismatched contacts or lubricants that have turned to stone. They're really pretty simple devices to rebuild. The only problem I can see is if the connection on the bottom of the fiber board is corroded. That would be easy to fix with a wire brush and some solder. Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now