FS: Model T & A Ford Parts

May 15, 2008

Model A Ford script coil. No bracket.

Snyder’s repro. Never used. $40.

1913-1919 Ford Model T radiator cap.

Brass "low fin". VGC with minor nicks. $10.

1926-1929 Ford T or A tire valve dust cap.

Nickle plated brass with normal wear - brass shows at corners. 12 flats; 2.35" OAL; no lettering. $6.

Model A Ford tranny parts:

Good used U-joint - no wear. $50.

Shaft seal kit. Bolts to rear of case to prevent leaks at end of shafts. $15.

Model A shock arms -

Front curved arm:

One pair @ .82" thick counterbored boss w/ .002" & .010" ball wear. $20 pr.

One pair @ .91" thick counterbored boss w/ .008" & .017" ball wear. $20 pr.

Front straight arm:

One arm @ .69" thick flat boss. Needs ball. This style not available as repro. $7.

Rear arm:

One arm @ .795" thick counterbored boss w/ .016 ball wear.

Markings: F-341. $10.

2 very good 19" Model A rims.

Magnafluxed and small cracks found at bolt holes professionally TIG welded.

The few spokes that needed it were straightened.

Mounted on a front hub & spun to check runout (less that 1/8").

Bolt holes are not OS - checked with a new lug nut.

One in zinc chromate primer; the other as found.

Spokes and exterior of the rims in very good shape - should take a nice paint job.

Inside of the rims have the usual pitting near valve stem and bead seat.

$50 each. Digital pictures available.

Brake rod springs - flat style for thru 9-31.

Snyder's repro, in package. Black oxide finish. $6.

Starter Bendix. Original style. Snyder's repro.

Never used. Late '28 - '39. $15.

James Andrews, 2875 W. Third St., Siler City, NC

All prices plus shipping from 27344.

Recommended Posts