Jump to content

Headlight bellcrank


Al Hay

Recommended Posts

There are two thing that go wrong with the headlight motors. The nylon rollers inside the gear box portion of the assembly and the bellcrank on the output shaft of the motor. The bellcranks are still available new from GM but are about $100. The best solution is to buy a kit from Barney Eaton. His kit is $ 45 and includes the rollers, an upstop nut and a reproduction bellcrank made of steel that will not wear out like the originals. Barney can be reached at barney@texas.net

I have many Reatta parts cars and can supply most any other part and can be reached at jfinn@cpinternet.com

Link to comment
Share on other sites

Guest inthespot

My vote is get with Barney, I had one go bad so I ordered one for each side as I knew the other one was not far behind. It took about an hour or so to replace both of them. The second one only took half the time as the first one. They both work great now and if I can follow his directions that are included then anyone should be able to.

Just my thoughts on the subject. Mike

Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
×
×
  • Create New...