Guest imported_JohnW Posted February 19, 2008 Share Posted February 19, 2008 Is the tension spring in the windshield wiper arm easy to replace. I replaced my wiper blades yet it does not clear the complete windshield. I believe the tension might be the problem. Any thoughts? Link to comment Share on other sites More sharing options...
DAVES89 Posted February 19, 2008 Share Posted February 19, 2008 I had the same problem. I lubricated it with a rust dissolver then sprayed it with a white grease. The tension could also bew the problem, as mine worked better but didn't fix the situation. Link to comment Share on other sites More sharing options...
Machiner 55 Posted February 20, 2008 Share Posted February 20, 2008 Here's what GM had to say about it... Link to comment Share on other sites More sharing options...
Roadster90 Posted February 20, 2008 Share Posted February 20, 2008 Geeeeeeze....us Whooo...I haven't a weight scale of any type....In the FSM (manual)page displayed it seems/appears that there is A whole lot to-do about that much neglected little wiper arm thingie I would conclude Myself personally, I think if I had a problem I would be writing Mr. Jim Finn for a replacement..Oh, jfinn@cpinternet Nite Link to comment Share on other sites More sharing options...
Machiner 55 Posted February 20, 2008 Share Posted February 20, 2008 There are some things that I need to know about and can't find a damn thing about them in the FSM. Yet, the lowly wiper blade gets four full pages in it. That's right there are two more pages! Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now