Nile Posted August 28, 2007 Share Posted August 28, 2007 I'm trying to remove the gauge cluster cover so I can straighten the leather. The 4 screws came right out, but the headlight switch is another matter. I found a white plastic button on the right side of the switch assembly and have tried pushing it in every direction, but no luck. Any advice? - Nile Link to comment Share on other sites More sharing options...
Guest LouZ Posted August 28, 2007 Share Posted August 28, 2007 Hey Nile, First get yourself a small flat hook with an end about the size of a jewlers screwdriver. Then turn on the lights.(pull it out as far as it will go). the shaft has a flat side, push the hook against the light knob and remove the knob. push the shaft back in to turn off the lights, remove the nut and keep on truckin.. There is a tension scraper locking the knob to the shaft, you have to push the tensioner into the back of the knob to release the tension Good Luck,, Lou Link to comment Share on other sites More sharing options...
car_chick Posted August 30, 2007 Share Posted August 30, 2007 On my '90 it just pulled right off.... but it probably wasn't suppose to. Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now