Search the Community
Showing results for tags 'crank'.
Found 4 results
Hello, So I know this is somewhat of an old tune as to how bad these leak, but lately I noticed that mine appears to be out of adjustment. the windshield isn't pulling all the way back into the frame. Anyone have advice on how these can be adjusted? I thought I'd ask before trying to pull mine apart this weekend. Any information is greatly appreciated. Cheers, Christopher
I bought an ati super damper. Part #918410. It falls straight in line with my power steering pulley. I called ati and they informed me the pulley is 1.75 forward of the stock location. That does not help me seeing the 3 groove stock pulley is large and would put the ati damper way out on the crank snout. Does anyone have pics or more info on this. 350 engine stock P/S bracket.
I am in need of a crank hole cover for my 1932 Dodge DL Coupe. If anyone knows of one for sale, please send me a private message, or reply to this thread. I missed one a while ago on eBay, mostly because I wasn't sure if it was correct or not. Anyways, if someone out there has one, I would be interested in purchasing. (actually, I would be interested in two, as both coupes I am restoring are missing this cover, but I doubt that someone has two spare covers!). Thanks!
I'm not a Newbie to Oldsmobiles, but this is my first Classic or Vintage Olds and since I've always been a Chevy man with the exception of my 58 Buick and my GMCs, I'm ignorant regarding early small blocks, however I'm reading great stuff about the 330 engine which is what's in my 65 Cutlass Convertible. The restoration done in the early 80s was well documented and the car was in storage for almost 2 decades but unfortunately the heir to the collector's estate is clueless, and I've found nothing indicating that anything was done except cosmetic work. I've not uncovered the codes on the right head yet because of the power steering pump brackets as I am driving the car for inspections, tire installation etc, but the casting on the front of the block shows to be a 66-67 394417 39° cam bank angle according to what I've read, so I'm asking for assistance. The number that's easily visible on mine is 394417 3 and my question for you experts is... COULD THIS BE THE CORRECT NUMBERS MATCHING ENGINE FOR A LATE PRODUCTION LANSING MICH 65 CUTLASS CONVERTIBLE, or has the engine been changed out? Everything indicates this is an original 66,000 mile car including the title and assurances of the seller and their agent, and I first became alarmed and concerned when my Carb guy said that this has a 67 W-30 Quadrajet which he's rebuilding and setting up for my small block since it ran really rich, leaked all over the place and loaded up on occasion. Tank and fuel lines were flushed and we're double filtering pre pump and in carb. Engine ID numbers on heads makes no sense to me because you can change out the heads easily, so how do I figure this out guys? If this isn't the correct engine for my car I want to acquire one eventually so I'll be on the hunt, and I want the best heads which are the 330 with a #4 stamp correct??? I've acquired some already so I hope so! LOL I'll have them ported polished with the larger stainless valves and hardened ex seats and keep driving with no down time, and those are the heads I have on the engine now too. Or, what about the Edelbrock aluminum with their intake?? Any feedback or advice since that's bolt on out of the box and can be as good of a deal depending on how much you spend upgrading yours? This is a driver, investment, local car show fun toy, but I want some things as close to original or kept easily restore-able for purist and value reasons. http://multiply.com/mu/justjordy2/image/1/photos/50/800x800/20/17-10-10-1642.jpg?et=NJ2zBff%2CZqSnUGr8tF7F6A&nmid=376555438