Search the Community
Showing results for tags 'bay'.
So my GS is a pretty low mile original, but it was not stored well for many years. It now runs like a top and my dad did a pretty darn good driveway paint job on it, but there is just light surface rust on many of the surfaces in the engine bay. I am in no position to handle a frame off restore on the car, besides, it runs and drives to well as it is.....most of what it needs is only cosmetic so I'm going to be handling all of this I can as a frame-on refreshing. I've removed the passenger front wheel and hub and am cleaning it and installing new inner and outer bearings. I pressure washed the inside of the wheel well to remove the old 50% gone, 100% cracked and peeling underlayment. I removed the Antenna access plate and replaced the original broken antenna with a spare I had. Removed all the passenger side engine bay accessories, pressure washed the sheet metal and low pressure washed around the motor along with a pick, screwdriver and toothbrush. Then a gentle degrease and rinse, prime and paint. I'll reassemble the wheel and well, then clean and replace the accessories. It came with an old set of aluminum AllState air horns that I may attempt to restore and replace although the original horns work fine. Here are some pictures: I'll post more pics as I progress. Trying to be done with the engine bay and both front wheels and wells by the end of the weekend. I know it's wishful thinking.