AussieLeigh

Thanks for you help.

18 inch with 6 internal lug and lock ring. I beleive that Dodge used the same wheel but in a 19 inch. I am even open to wheel centre only because I have new rims I can fit to the centre

Does anyone have any wire wheels to suit a 66 or could anyone email me some picture of these wheels so I know exactly what I am supposed to be looking for. leigh.raaen@optusnet.com.au Thanks

I am looking for Chrysler hubcaps as on CM6, ones to suit a wheel with a 6 inch hubcap hole.

I am after 72/75 model rear split bumper medalions.

72 Cowl and doors 75 Phanteon tub, doors, cowl, hood, radiator surround, rear guards 66 parts, lots of small items Can email pictures leigh.raaen@optusnet.com.au

Thanks, I understand what you are saying and that option will be my next thing to look into. Chrysler did come with a 3.9 to 1 ratio but in roadsters only and are very hard to find. The closest I have found so far is the 3.81 to 1 gears. Can anyone give me some contacts to do with overdrives. Leigh

Thanks, I'll to do some trials with this gear ratio first before getting any made but so far no one is interested in the least so I don't think it will be happening.

I am looking into getting a run of 20 crown wheel and pinion gears made to suit 1927-1929 chrysler. The gears will be 3.81 to as per 1930 V model but will suit early diff carrier. They will be very high quality, hardened and made in Australia if that makes any difference. The more I get made the cheaper they become. A run of 20 will bring the price down to about $800 AUD which is a bit high but when you think about it you get new unbreakable gears that will last forever. Some feedback would be nice. Maybe they can be made in the USA cheaper?? Leigh

Brian, I will email you some pictures tomorrow if I have time otherwire on Sunday. Leigh

1929 Chrysler 75 Pheaton body panels. No rust and very straight. Rear tub, doors, section between doors and the brackets. New timber in doors and section between doors, no timber in rear tub. It's in Australia but I can send anywhere. $500AUD Email for pictures leigh.raaen@optusnet.com.au

I couldn't find roadster rear panels so I got my hands on a 70 coupe body less roof. I would like to find out the door width on a 72 convertible coupe so I can work out how to make it all fit.

Hi, is there anyone out ther with a 72 convertible Coupe. I wish to ask questions and gain info. Leigh Thanks AACA

Thanks, I will contact them. Leigh

Hi, can anyone give me some contacts as to where I can get some engine gearbox and diff gaskets and seals for a 1930 Chrysler 66. Thanks AACA Leigh

Hi, can anyone give me some contacts as to where I can get engine, gearbox and diff gaskets and seals for a 1930 Chrysler 66. Thanks AACA Leigh

Thanks for the feedback, dragging clutch is what I have. Anyone know what thichness my clutch plate should be? The handbook says to have 5/32" clearence from pressure plate fingers to throwout bearing, does that sound right? I also don't quite understand handbook instructions on position of throwout bearing on shaft. The handbook says to position throwout bearing before adjusting pressure plate fingers. Can anyone give me a simpler explanition?

Hi, I have a 1930 Chrysler 66 roadster. I have replaced the cluth plate due to car sitting for years and oil leaked onto clutch plate. Now the gearbox is not engaging into gear propery with the pedal right to the floor and no matter what you do the gears grind when attemting to drive. I made all adjustments as per manual. I guessing I need a new bearing on the gear drive and a new bush in the flywheel. Any thoughts as to my problem. The gearbox was doing the same thing before installing the new clutch plate.

I'm looking for 1 x 19 inch wire wheel to suit 1928 Plymouth and 2 or more lock rings. can email pictures of what I'm looking for. leigh.raaen@optusnet.com.au Thanks for your time Leigh

Hi I'm looking for 1 X 19 inch wire wheel to suit 1928 Plymouth and 2 or more lock rings. Can email pictures Thanks Leigh leigh.raaen@optusnet.com.au

Could you email me a picture please. I'm in Australia. If you don't want to post to Australia I have a address in the States. I'm also after one 19 inch wire wheel to suit 28 plymouth and 2 locking rings. leigh.raaen@optusnet.com.au Thanks for you time Leigh

Hi, thanks for reply. Is the front drum a 5 lug?

Hi, I'm looking for 1928 Plymouth 5 lug hubs and brake drums. Front and rear. Thanks Leigh

Hi, I'm looking for 1928 Plymouth 5 lug hubs and brake drums. Front and rear. Thanks leigh

Nice car, your ahead in restoration, I'm still looking for the roadster rear panels. I have a lead and am checking it out tomorrow. I'ts a 70 model I think but I can make it work. Leigh