Jump to content

V12Brown

Members
  • Posts

    24
  • Joined

  • Last visited

Posts posted by V12Brown

  1. I have a '35 V12 Packard. I would like to clean the oil pump strainer but before I just jump into doing it is there anything I should be cautious of or any advice?<!-- google_ad_section_end -->

  2. I have a '35 V12 Packard with a dual coil. Problem began about a month ago. Car would start and idle with no problems but when I drove the car especially up a grade the car lost power and the regained power on the down hill. Initially I thought that I may have had a fuel problem. I drained the gas tank, installed fresh gas, changed the electric fuel pump (in line before the manual pump) and then started the car. As before no power going up hill. I then pulled one of the plug wires and grounded it and got a small weak spark. New points and condensor installed but same problem. Started the car again and ithis time it idled somewhat rough and then it died on its own. Rechecked for a spark at the plug wires and this time no spark. Is this a coil issue? If so who do you recommend to rebuild the coil. Thanks for everyones help.

  3. I am restoring the interior garnish mouldings on my '35 Packard. Unfortunately I am missing some of the thin metal inserts (inlays) where your arm rests. Does anyone know of a resource where I can locate or have them made?

×
×
  • Create New...