Jump to content

gmdbhornet

Members
  • Posts

    116
  • Joined

  • Last visited

Everything posted by gmdbhornet

  1. Thank you all for the help. Let's see what happens.
  2. I think a lot of cars got junked back then for bad tranny's.
  3. The exterior color was two-tone white top and blue/greenish bottom. I tried to get more info from my dad but he just turned 88 and doesn't remember much more. He is going to look for the pictures of the car and if there is anything else and I will post once I get something. He lived in Brooklyn NY when he bought the car and probably sold it or junked it in NY. Thank you for the responses and assistance.
  4. Just came across this topic I posted awhile ago. The car is probably gone but you never know. Maybe someone has it.
  5. I am not sure but someone on the forum might be able to answer.
  6. Driveshaft removed from a 65 Buick Riviera. Make offer plus whatever it is to ship. Thank you Gerry.
  7. 65 Buick Riviera evaporator, box and brackets for sale. Unknown if evaporator is leak free or any condition to be used. 55.00 plus shipping. Thank you Gerry
  8. If anyone is interested I have door skins and trunk lids for a 65 Riviera. If you are interested let me know and I will send pictures and we can discuss price (very reasonable) and shipping. Thank you Gerry.
  9. The muffler has been sold. Thank you. Also I have many other parts and if you need anything just send me a PM and I will let you know if I have what your looking for.
  10. Muffler was purchased from Waldron's. It fits 2 1/4 inch exhaust pipes. Minor use 300-500 miles. $60.00 plus shipping. Thanks Gerry.
  11. Ronnie 27 The motor mounts look fine and the transmission mount fixed the vibration at 2000 rpms in park also.
  12. I wanted to pass along that I figured out why my 65 Riviera had a vibration when I would decelerate. I replaced the transmission mount and when I installed the new one I had to raise the transmission up approximately one inch. Once install the vehicle did not have the vibration at all. If you do replace the transmission mount make sure you test fit the bolts because the new one I purchased had a different thread pattern. Thanks again for all the responses and help.
  13. Thank you to everyone for all the responses. The car starts vibrating on decelaration between 50-55 mph and in park at around 2000 rpm's. The car does not have A/C. The vibration started after the installation of a complete exhaust system and after the transmission was removed and resealed. These were done within days of each other so I am uncertain and cant pinpoint if it started after the exhaust or transmission. The vibration can be felt throughout the whole car (if that makes any sense) - had the driveshaft rebuilt- still vibrates and did so prior to the rebuild. - rotated the torque converter and checked all positions. Vibration did not change and also ran vehicle with torque converter unbolted from flywheel. No change in vibration. -removed belts and ran motor and still no change. - checked exhaust and no pipes were touching the body but I need to get it on a lift to do a better inspection.
  14. It's a 63 Buick Wildcat. The cable which drives the front and back motion was damaged because the transmission was not operating due to it being seized. The plastic which covers the cable was torn off at one end and the plastic end which holds the cable in the transmission is broken off.
  15. It only happens on decelaration from 50-55 mph.
  16. The problem has not been solved and still haviong the problem. I think it is the exhaust and have to get it on a lift to check it properly. Gerry
  17. I am looking for a power seat drive cable and would like to know if anyone has one or knows a place that might make it if you send them your old one. Thanks Gerry
  18. He said he can cut the pattern for you or sell you the material. He just said he did not have the pattern for the 65, but like Ed said I think they should be the same.
  19. Dick thanks for the photo. Is that material from Jenkins? I called a few times and got in touch with the son. He said his father passed away and was in the process of getting back into business. He said he had the material and it was 55 a yard. He said he only had the pattern for a 63 and 64 but not the 65, but i think they are the same.
  20. Does anyone know if Jenkins Interiors is still in business. I tried to call and received no answer. I wanted to purchase their trunk material because their sample was close to the original. Any photos of installed trunk material in a 65 Riv and where it was purchased from would be helpful. Thanks Gerry
×
×
  • Create New...