Jump to content


  • Posts

  • Joined

  • Last visited

About Taco

  • Birthday 02/19/1965

Taco's Achievements

500+ Points

500+ Points (2/7)

  • Collaborator

Recent Badges



  1. Thanks a lot, for helping me out of this problem. I will look at it, and will post later what the results are. Taco.
  2. Tanks for your answer. This is mine: I hope i can get one somewhere. I can make some more pics of the inner side of the pump / fan. Taco.
  3. My Buick has a rather new (ten years old??) fan with in the centre a 'cap' with oil in it. (round the axle) In there is an oil pump with 2 toothed wheels. One is missing. Can someone deliver me such a tooth wheel?? Taco.
  4. No, it's not for myself, but for my son (9 years old). The plane is a Klemm 25. Yes, it's 1/4-scale i think, wingspan is 260 cm. Taco.
  5. Bolts arrived today, Thanks again Larry. Taco.
  6. Many thanks...... Tell me what the costs are. Taco.
  7. Yes, you are right, it could be a Zenoah. <span style="font-style: italic">Made in the Canada </span>is on the bottom of the crank case. <span style="font-style: italic">Made in the USA </span>is on the Fly wheel. And There is <span style="font-style: italic">REPCO</span> written on. There are some differents between the drawing and the photograph, but you may say it's maybe an older version of Zenoah? Taco.
  8. The engine is made in the USA and Canada. There is no name on it further. Today i will sent the bolt to Larry. He will find out what it is, and get me some i hope. Taco.
  9. It's difficult.......... I will sent the bolt to Larry. He shall have a look for me. Taco.
  10. Here the pics: it's for a model airplane this time, not for my old car. And the bolts: On top a 10-32 x 3/4 (printed on package)(diameter 5/32) In the middle: 10-32 x 1/2 (diameter 3/16)(right diameter, but too much threat at 1 inch)These two different bolts were bought in the USA recently. At the bottom my unknown bolt. I will sent Larry Schramm my bolt, if we cannot find out what it is. But i think we will. Taco.
  11. @ simplyconnected: there was too much treath on de bolt at the same lenght. Ik will make a picture with 3 different bolts on it in one hour. Taco
  12. The outer diameter of the threat is 6/32 inch. I do not understand the 1/4". That's allmost 6 mm, and mine is 4.65 mm. So, a bit thinner. Some people here say it's UNC, but what that is? I am sure about the '20' threat. Taco.
  13. Yes, it's a socket head cap screw. Well, here it is: Measerments: Total lenght: 26/32 inch. 'lenght' of threat: 15,7 mm. (5/8 inch) Diameter: 4,7 mm. 13 'rounds' of threat. I bought some 10-32 x 1/2" and 10-32 x 3/4" bolts, but they are wrong. Taco.
  14. We need some bolts. Its 10x15 UNC. Here a pic: Here in Europe its difficult to find some, can someone help us with 4 or 5 bolts? Taco.
  15. It looks a bit like mine: a '28 Coupe. Taco.
  • Create New...