steelman
-
Posts
980 -
Joined
-
Last visited
Content Type
Forums
Gallery
Events
Posts posted by steelman
-
-
Friend (a real Ford guy) just bought a 66 Tbird. He admits it is a nice car, but still not as nice as my Riviera. But he didn’t want to spend the money a first gen Riviera would have cost.
-
2
-
-
Red car looks sweet too! Is it a 36?
-
1
-
-
We always called those “sex bolts”. They have a male and female side. You can get these in various lengths. McMaster Carr is my go to for unusual bolts.
-
David, I am not sure your car being lowered has anything to do with your vibration. My 63 is bagged, so it will run high, low, or any combination in between. I spent yesterday driving around in various positions trying to see if any combination would create a vibration similar to yours. I could not. High, low, front up and back down, or front down and back up, or even side higher combination created no vibration. One of the benefits of having the shop at the end of a private road means I can take road conditions out of this testing, as it was all done on the same road. Not the info you wanted to hear, but I tried.
-
1
-
-
Gene, now I know what old plan drawers can be used for. We used to have a warehouse full of these.
-
It may have more to do with the way the manifolds are constructed than the carbs.
-
36 minutes ago, J3Studio said:
All it does is cost a little bit more money.
All insurance is great until a claim is made. Not all policies, or even stated value policies are created equal. And in the case of a total loss, most are the same. The issue comes up when it is not a total loss, or you are under insured and the repair costs more than the stated value, but you want to repair the car. Check with owners who have had to make claims before picking an insurance carrier.
-
1
-
-
9 hours ago, 71GS said:
Beautiful pair ya have there Bernie. But yes, everything looks better lowered😁😎
Have to say I agree. I had to go back and find these, but here is a before and after of mine. Yes, lowered is much better.
-
1
-
-
Two on each side, I think. One in front of and one behind the centerline of the tire., for left and right turns. I had to trim my stainless wheel opening molding a little more to clear these, but it took care of my rubbing problem. Yours looks like it has already been trimmed. Mine was not trimmed at all, and ran right by these divots at full width on each side.
-
If you decide to remove the rivet heads completely, pull the drums and knock the rest of the rivet out of the back side of the hub. A rivet without a head is just a rivet waiting to come loose and fall into the braking mechanisms. As Tom stated above, he has removed these without affecting the hub/drum relationship. They may stay in the hub/drum assembly without heads forever. But I wouldn't take that bet.
-
1
-
-
Not even sure I should ask this, but didn't black interiors get a silver headliner? Did that vary with standard or custom interior?
-
John, regarding the screw at the back of the console, this was a mid year change. Early production did not have a screw at the back in this location. So your early floor might not have a hole to align with a later console in this location. Get everything else aligned and drill this one through the floor last.
-
1
-
-
Check to see if the same year Impala is made. Should be the same.
-
Very early 63s had a painted windshield trim. This was changed to a chrome molding early in the model run. Do you know your build date? My Dec. 62 car has chrome moldings, so it was changed before that.
-
I thought doors and ignition were the same, trunk and glove box took the round key. Mostly I use the remote for the trunk and have never locked the glove box.
-
My concern would be the urethane sealer. If the installer gets this on the trim you almost have to throw the trim away. it will not come off. Maybe the installer gets it perfect. Not sure I want to take that chance. I would remove the trim and play it safe.
-
1
-
-
I think he fell in the wagon. As in a 1994 Buick Estate Wagon. AKA Large Marge.
And the seven step program is for quitters. Not sure he wants to quit. Or we want him to quit either.
-
2
-
-
2 hours ago, J3Studio said:
Agreed—and it happened well into the 1980s. Chevrolet printed four separate versions of the 1984 Corvette brochure (I have one of each). The early versions of the brochure include the "standard" 15-inch wheels that never shipped on any C4 Corvette.
Because 15" wheels would not clear the redesigned larger brakes of the C4.
-
All original with a Sanden A/C compressor and an Alan Grove bracket painted the wrong color supporting it.
-
Ken, if you have the old one in hand it is best to take it to a radiator shop and have it recored. They will put your tanks on a new core and when you get it back you know it fits because it is the one that came out of the car.
-
2
-
1
-
-
Or did he mean Locke, which is a plumbing supply chain? Kreed should answer back shortly.
-
But these are worth more if you call them Cadillac air cleaners rather than Oldsmobile air cleaners.
-
3
-
-
51 minutes ago, Riviera63 said:
As the guys above said, bolt in for 64 & 65. Would need major modification to add to a 63 or you would need to swap in a 64 or 65 seat bottom in case anyone is thinking of adding to a 63. I found this out the hard way. I restored a center armrest over the winter a few years ago to put in my 63 thinking it was a bolt in. Very disappointed when I saw that it was not a bolt in. My fault for not looking my seat over first. I decided it was too much trouble and sold it. Probably not too bad for someone with welding skills.
Bill
Thanks, Bill. I guess I was thinking about your adventure when I made my earlier post. So to clarify, not a direct bolt in for a 63.
-
I don’t think you can add the arm rest to a rear seat that wasn’t equipped with one originally. Rear springs and frame are configured differently in this area. Expect to replace the bottom rear seat frame or heavily modify what you have now.
[1963] What Was The Real Competition?
in Buick Riviera
Posted
Thanks, Ken. These are Billet Specialties GS-47s. These are custom made to order. I love them and everybody comments they look great on a Riv. Not cheap and you have to wait while they are made, but it was the right choice for my car.