Jump to content

herm111

Members
  • Content Count

    214
  • Joined

  • Last visited

Community Reputation

45 Excellent

About herm111

  • Rank
    Kohnke Rebabbitting

Profile Information

  • City, State, Country
    Clare, Iowa

Recent Profile Visitors

1,258 profile views
  1. This is a Vulcan Rod lathe, later bought out by Storm, and then renamed the company, Storm Vulcan. The Vulcan Rod lathe is the same as the Storm Vulcan, except the Storm Vulcan has two free standing belt guards, one on each end. It will do babbitt rods, Bore wrist pin bushings in the Rods, and will bore the big end of the Rods, for resizing of insert Rods. Excellent Condition, 3,500.00 Herm
  2. Long Story, but this is a rebuilt Boring machine in 1945, and never used again, as they bought another new one to do rods, as they were getting behind. I took it all apart to paint it, and it is rebuilt, in new condition. If you look up Hydro-Borer, on the net, it does all kinds of jobs. I was going to build a jig to bore different size ball caps, never got around to it. 2,800.00, plus shipping. Has manuals. Web site phone number 515-303-0363 It will ring, shop, house, and my cell phone. Herm.
  3. 1903 Olds Pictures. I have many, it won't let me list any more. That Sucks ! Herm.
  4. Pictures of another 1903 Curved Dash Olds. First two pictures are on a new made crank, that they messed up the radius on at a crank grinder in Texas, where the owner had sent it, you have to watch! Arnold Motor, in Spencer, Iowa, had to fix it. This is all this post will let me post ? Herm.
  5. I went back and looked at your burnt out rod, and the last time they were poured, somebody, used Lead Babbitt. In any case, the tinning was not very good, as there should be some showing in the rod part. The two half flanges show to cold of pour, as the flanges did not stick to the sides of the rod, and they are always the first part of the bearing to go. I will put some pictures up of lead, and tin base babbitt, difference in color, Lead id the dark. Also pictures of a bad flange not sticking, and the way they should be, and some others. I co
  6. When a Babbitt Bearing go bad, you can normally limp back home, and put in another rod. When a insert goes bad, your dead in the water. Also, inserts have a way of going obsolete, or in the size you want, or chewing up the crank, where it has to be ground. Herm
  7. If the old main inserts are not hammered, cracked, or lost and I am not talking about the babbitt, as that doesn't enter into it. There is no reason in this world, to ever make new inserts. Sure, I know it adds more money to the babbitters cash flow, but I am telling you, it is a waste of money. When heated to pouring temperature, old or new shell, makes no difference, they both will bring there parting edges, together, and you fix that step, during the machining operation. Now, steel backed shells, will, hardly move at all. Herm.
  8. Yep, it doesn't take long for an out of line crank, to break! Herm.
  9. Pour the old inserts, and align bore, and your back to New! Herm.
  10. Not all bearings are babbitt topped these, some are Aluminum, and other alloys. Herm.
  11. There is no way you can fit old bearings to any crank, as you don't have enough babbitt to work with. Herm.
  12. We use the same Babbitt formulas today, as was in 1900. If the foundry, doesn't have what you want, they will mix i for you. Herm.
×
×
  • Create New...