car_chick

Selling the last of my TC parts. I think I've finally found them all. 2 sets Stainless Door jamb covers $25/set or $45 for both sets Pair of Tonneau cover hinge mechanisms with struts. $25/pr Window motor/regulator assemblies. Worked when they came out of the car. $40 ea or $70 for the pair Windshield Washer Reservoir - Not cracked $10 Power Door Lock Actuator rods $5/pr Distributor Cover $5 Center Console leather Kick Panels (89) $10*These are different from the 90/91s Center Console leather Kick Panels (90/91)* $10*These are different from the 89 Center console armrest. Recovered in nice, soft leather but not OEM look. $20 Will sell everything listed above as a single lot for $180.00 plus shipping.Body Parts: (Strongly Prefer local pick up in Fredericksburg, VA)Driver's Fender, non-OEM yellow, no dents or rust $35Passenger Fender, non-OEM yellow, no dents or rust $35Passenger Fender, OEM Red, no dents or rust $35All 3 fenders for $90Driver's Door, non-OEM yellow, $35 Complete stainless exhaust system (from manifold back) with cat, $70 (no pic)I will get good pics of body parts if anyone is seriously interested. I will ship body parts if I must, but there will be an additional handling charge + shipping. I really, really, really don't want to ship the door. Too heavy and odds are it will arrive damaged.Parts are in Fredericksburg VIRGINIA.Shipping at buyer's expense.Local pick up available.PayPal (buyer pays fees), Zelle, or Cash. 👉 👉 👉 email me directly at creseida (at) yahoo (dot) com 👈 👈 👈 I am not on the forums much anymore, so I won't see any responses.

Sorry, I got locked out of my account. Parts are sold

Not sure what your problem is with me, Hemi, but you need to get over it. Adams TC asked a question and I answered it. Between this and your boorish message to me because I dared post a sales ad for my two service manuals, you really have a chip on your shoulder. Is it because I'm a GIRL???? 🙄 People like you are what ruin car clubs.

Only the shifter knob. Hand carved burled maple. Everything else is plastique.

I managed to remove them successfully with a very high-end and exclusive tool. here it is at Amazon, but you can probably find it cheaper at your local Walmart. https://www.amazon.com/AMES-Companies-Inc-2447000-Weeder/dp/B0792PN86Y/ref=asc_df_B0792PN86Y/?tag=hyprod-20&linkCode=df0&hvadid=366329556945&hvpos=&hvnetw=g&hvrand=17318227042676106051&hvpone=&hvptwo=&hvqmt=&hvdev=c&hvdvcmdl=&hvlocint=&hvlocphy=9008198&hvtargid=pla-795909328772&psc=1&tag=&ref=&adgrpid=77906172644&hvpone=&hvptwo=&hvadid=366329556945&hvpos=&hvnetw=g&hvrand=17318227042676106051&hvqmt=&hvdev=c&hvdvcmdl=&hvlocint=&hvlocphy=9008198&hvtargid=pla-795909328772

Sorry for the pic delay. It's been a crazy week at work. Will get them ASAP

They are 15" stock TC Fondmetal rims Will try to get pics tomorrow

Selling as a lot only: 2 door panels. The leather pleated inserts and carpet inserts have all clips and velcro to attach. They are separated since they need to come off to install door panel anyways. The need a good cleaning, but will be decent driver quality with no tears. 2 pocket panels; one has a dinged corner. Satin lining in nice shape. Leather needs to be cleaned but no rips or tears. 2 rear panels with speaker grilles - one is from an 89, one is a 90. You get both in the sale. $75.00 plus shipping takes everything shown. Local Pick up near Fredericksburg, VA

I have some rims, not sure how many. Is there any interest? If so, I will dig them out and take pics. Let me know!

Sold

Hi Merrill, yes I remember! Sending a private message....

Center Console Cubby insert - good condition, no cracks. $10

Continuing my list of parts for sale... 1. Front Fenders - Pick up Only - **NO RUST** - 2 Passenger, 1 drivers, $35 each. $100 takes all 3. Yep, they're super dusty from storage in the barn. 2. Stainless Door Jamb Covers - Nice Condition (will get better pics if there is interest) $25/set. 3. Complete rear hub assemblies, both sides. Came off a 1990 car. (I don't know if there's a difference between 89s and 90s) $25.00 They are heavy so shipping might cost some $$. 4. Ginger Seat Belt Set. Works properly. Sell as set only. $20.00 5. Transmission cooler off 1990 TC. Car was running and driving when parted out (broadside total loss). $10.00 More to come...

Now that Guido has found a new home, I have some spare parts to sell. Prices do not include shipping unless otherwise stated. 1. Ginger Seat Belt Cover. Has 2 cracks that can be stablized. *sold* 2. Complete set of Window Switches and Backing Plates. Misc Seat Switches. $75 for everything shown includes shipping in Continental US. Will not separate. 3. Leather Gauge Dash Cover. Driver Quality. *sold* 4. Ginger Trunk Lid Carpet, Good condition, binding a bit chewed. *sold* 5. Quarter Window Weather Stripping, Driver & Pass. Driver side has small tear. $10/set **SOLD** 6. (No Photo) - Complete original Cat-back exhaust from 1989 8v. Removed from car at 70,000 miles to put custom exhaust on. Includes Cat and Muffler. $75.00 7. Passenger Door Glass, OEM Sicursiv. $40 8. Driver's Quarter Window Glass, OEM Sicursiv. Yellow paint overspray. $25 More parts to come...

I have two bumper covers. They are free. Can be Daily Driver quality if yours is completely trashed or missing. Good for parts (stainless and rubber). 1 front, 1 rear. They were painted a non-OEM yellow. Front bumper is missing lower grille area. Crack on pass side. Comes with intact bumper sliders. Rear bumper comes with impact brackets and wiring, missing rubber strip and one piece of stainless. Fredericksburg VA. Will keep these parts until April and then they go to the dump.

Service Manuals for Chrysler TC. One early version (Blue, c. 1988) One late version (Red c. 1989) Good used condition. No missing pages. No excessive wear. $70 each including shipping in the Continental US.

They had the driver's front only listed. So I tried to reverse cross reference that number with other cars (Daytonas, Dynastys, etc) of similar years and it kept saying "This is not a fit". So I figured I'd come here and ask since I know y'all have had to replace them at some point. How about rubber brake lines? Do Daytonas fit there, too?

1989 2.2 non-Cosworth

What brake calipers will work on a TC? I have at least one stuck caliper (haven't determined yet which one). I can only find the right front caliper (reman) available as listed for a TC. Are there any calipers from other models that interchange?

Are you related to the Karb King guys in Fred Vegas, VA?

Hi Josh, I have the fender. $40.00 It's Exotic Red, no rust or dents. Paint is good, too. I have the filler strip $20.00 (already removed) I may have the bumper impact/support bracket (will check which side in the morning) currently still on bumper cover. I also think have the chrome all the way across, but it's still on the bumper cover. I think I have the black rubber bumper cover, too, also on bumper cover. I can sell you the whole bumper cover for like $50.00. Doesn't include lights, and the cover itself is junk, but the parts are good, IIR. Prices plus shipping. Where are you located? I can take photos.

Hi, I have acquired a Choldun Pressure Purger but cannot find a whole lot of information about this piece of equipment. I have found ads from 1948-1950 for it to help me date it, but other than that, I have found almost nothing. Mine is an original unrestored machine that appears to work as it should. The paint was originally off-white, but has a definite patina to it now. It has the original and correct Pyrex Glass Globes with "Choldun" embossed in them. Everything appears original to the machine with "Choldun" embossed or otherwise labelled. I am trying to figure out what it might be worth among other things. I have found only one other Choldun item that sold at auction. A restored Oil Changing machine that sold for about $950 at RM Auctions in 2008. Choldun also apparently made automatic car washes in the early 50s. I know this piece cost about $295 new. The Oil Changing machine cost $169.50 new. Any ideas on where to find out more about this machine or how much it might be worth would be appreciated!

Forgot to mention that the car is located in Fredericksburg, VA.

Solid car with *VERY RARE* tinted glass. Not just the windshield but ALL glass is tinted. This was an option available only on southern cars and only about 5% of Corvairs were sold with this option. This glass sold separately is worth over $400. The car is solid, but has had some amateur body work in the past, most notably on the left rear quarter and left rocker panel area. The rest of the car is good with only minor surface rust here and there. The front trunk area is solid with a few pinholes along a seam. There is no motor. The rear is still in the car along with the heavy duty suspension. The powerglide trans (automatic) comes with the car but is not installed. The interior is ok but needs to be redone. The headliner has a split about 2" long. The dash is decent but has some wrinkling in the pad. Instrument cluster is nice. The carpet is newer and looks good. The front seats are replacements from a newer car but aren't all that. It's missing the upper part of the back seat. The sale does include bumpers and the wheels with hubcaps as shown. Selling the car for $600.00 with a bill of sale. I have plenty of detailed pics if you'd like to see more. Email me at cliff barns by (at) yahoo (dot) com. Remove the spaces in "cliff barns by".

Yes, I do. $90 plus shipping and it's yours!