Jump to content

pmdolan

Members
 View Profile  See their activity

  • Posts

    180

  • Joined

  • Last visited

 Content Type 

Everything posted by pmdolan

  1. pmdolan
    The Stanton, CA car has made it's way back down to the states. Wally and Sharron Taylor (RIP) started the restoration, and Sheila and Kem Jones had it completed by Ken Hindley in Union, ON. I purchased the car, and brought it back to IN in Oct 2022. The '32 DeSoto was in fact the same body (Survivor car shown here in red).
  2. pmdolan
    Trying to ID this hood ornament for an elder friend of mine. Who can steer me in the right direction, or positively Identify it?
  3. pmdolan
    After researching the auto screen opinions, I find that everything I’ve seen uses two independent mounts, that would allow for body contour. I can envision it possibly being a visor mount. The research continues.
  4. pmdolan
    This bracket had been made into a chauffeurs window divider on an economy car, in front of the rumble seat. The scale was off, and it looked really out of place. Looking closer at it, it has a LH/ RH index to it. The only marking, or casting is a number 3, centered on the back of the mounting bracket. It measures 14” long overall. I’m thinking that this is a wind wing bracket for a large luxury car. Any direction, or confirmation would be greatly appreciated.
  5. pmdolan
    I am knee deep in circa 1929-32 MoPar stuff, but have found myself now looking for a 1930 Hup Model C complete long block. Air cleaner to exhaust manifold. I have no idea how easy or difficult this might be to find. Can someone give me the skinny, or point me in the right direction?
  6. pmdolan
    A friend thought this was a 29 Dodge body, but I don't think that's what it is. Can anyone ID it by the distinctive body lines? thanks
  7. pmdolan
    I'm looking for knowledge and parts resources for a 1951 DKW RT125. Located in NW Indiana.
  8. pmdolan
    Thank you so much for giving me direction! Very much appreciated!
  9. pmdolan
    My uncle drug this home this evening. He liked it because it turns over and has good compression, only neither of us know what it's for. I guessed an old motorcycle engine that served a second life as a power unit for something else. It could be a later micro car engine for all I know. Thanks for looking at my pics. Any guidance is helpful.
  10. pmdolan
    The cowl bracket mounts measure 3 1/4" on center. It looks like that black bracket locks onto the bottom chrome piece with a keyed lock cylinder.
  11. pmdolan
    That does look like a pretty good match!
  12. pmdolan
    If your handles are '49, this one I have must be a year or two later. Does anyone know for sure?
  13. pmdolan
    The interior handle is saying Hudson/ Essex to me. Chrysler mounted their exterior handles on the body molding, not below it. It's the orphan with the closest look to Chrysler product, and often mistaken for it. You want to confirm, but that's what I'm thinking. 1928-1930, and yes, I would say sedan. Couple doors are wider.
  14. pmdolan
    Thank you guys. I try not to let unidentified parts sit around for years. There is always someone who could put it to use.
  15. pmdolan
    Similar to a 1931 Cadillac. I'm trying to determine what automobile this rock guard fits. It's larger than many I've seen at 20" wide and 33 1/2" high. Any direction is appreciated.
  16. pmdolan
    These have been put up in the barn for years. I am trying to ID them. I believe it's a left and a right. Someone had told me they thought they were '21 Willys, but it's not been confirmed. I appreciate any input.
  17. pmdolan
    I've had this for a few years, and have never been able to pin-point what it's correct for. It has a casting part number of 492889, on the bottom of the cleat. I've been told that it is not Buick or Cadillac. It certainly does have the GM styling, so I'm guessing Pontiac, or maybe Oldsmobile. Can anyone direct me on this one?
  18. pmdolan
    Still trying to ID this one.
  19. pmdolan
    I'm guessing the windshield stanchion fit into these??
  20. pmdolan
    Another idle item collecting dust because I have no idea what it fits. Anyone??
  21. pmdolan
    This is still on the shelf needing to be ID'd
  22. pmdolan
    Here are pics of the top irons that are correct for your car. I could really use a set of top bow wood, to use as patterns for new wood.
  23. pmdolan
    Thought I would add these progress photos of the chassis painted, and put together back in 2011. It runs good!
  24. pmdolan
    Any part you are in need of for the 30-U, other than a trunk lid, just let me know, and I'm sure I have it. I've owned a dozen, and have plenty of parts.
  25. pmdolan
    Scott, I have most of what your looking for. I sent you an e-mail. Patrick
×
×
  • Create New...