[1930 buick 60 series brake conversions]

1930 buick 60 series brake conversions

Hi Has anyone converted a 1930 60 series (132" wheel base) to hydraulic brakes,Drum or disc.I plan on using my coupe as a daily driver.

I also need the outside sheet metal piece that connects the top of the A pillars above the visor.

Thanks George

[How to polarize a cut out relay on a 1928]

Hi Fred

Momentarily touch a jumper wire between the gen terminal and the battery

terminal

[1930 buick /68 need king pins]

Thanks i,ll give it a shot.

george

[1930 buick /68 need king pins]

Hi

I,m trying to find a set of king pins for my 1930 Buick model 68 coupe. Can any one help? Buick part for the pins is #188975

I also need the need the sheet metal piece that goes across the top of the A pillars above the visor.

thanks

george

I found my kingpin set at rareparts.com. They were very helpful and almost 1/2 the cost at bob,s

[1930 buick / 68 needs king pins]

Thanks Mark I have been doing just that but have had no luck with finding any.

George

[1930 buick / 68 needs king pins]

Hi

I,m trying to find a set of king pins for my 1930 Buick model 68 coupe. Can any one help? Buick part for the pins is #188975

I also need the need the sheet metal piece that goes across the top of the A pillars above the visor.

thanks

george

I found my king pin set at rareparts.com Thanks for your input.

George

[1930 buick 5 passenger coupe mdl 68]

Does any one know where i can find a king pin set for this car?

I,m trying to find out when this coupe was produced (date). I,m not sure how the numbering system works.Is it by model or is it total production?

It,s a 1930/68 5 passenger coupe.

job # 30122

body # 831

frame # 2347918

I also need the steel trim piece that goes across the top of the visor

and connects to both a pillars.

Thanks

George

[1930 5 passenger coupe mdl68]

I,m trying to find out when this coupe was produced (date). I,m not sure how the numbering system works.Is it by model or is it total production?

It,s a 1930/68 5 passenger coupe.

job # 30122

body # 831

frame # 2347918

I also need the steel trim piece that goes across the top of the visor

and connects to both a pillars.

Thanks

George

[1931 cowl moulding]

Hi Check out ebay this guy is parting a 30/31

#140133002160

I'm looking for a deck lid for a 30-68

george

[1930 buick-68 wood patterns]

Hi I need information on where to find wood patterns for my 30-68 5 passenger coupe,or does anyone make a kit for these. I also need a deck lid and hardware. Any help would really be appreciated.

Thanks George

[Need 1930 wood patterns or kit for a model 30-68]

I need information on getting wood patterns for a 30 - 68 coupe.

Does any one make a wood kit for this car?

I also need a deck lid for this coupe.

Thanks George (5016)

[Has anyone had parts rebuilt by CARS (oldbuickparts,com)?]

Hi you have hobbs carburater in pelham n.h.for your carb and the place i would use for the starter and generator is ace generator in medford ma. or there is a place closer to you by the tingsbough bridge called chelmsford alternator. all three should be in the phone book . There is also a buick restorationshop in lowell just out of the center off andover st. Close by where old mother hubbard used to be.I think he advertises in the buick bugle.

I hope this helps

George

[1930 60 series wood]

Hi I just found this post and was wondering if you have had any luck finding wood kits or patterns.

I just bought a 30-68 and the wood is all gone. Thanks george wright bca 5016