1970delta88

I am in desperate need of Rotors for a 1970 Delta 88. I need the 2 piece rotor hub assembly. And it must come from a 1970 Delta 88 ( I do not believe there is much that will fit besides the originals ). If any one has one or a pair I am willing to pay good money for them. Please contact me via this post or my e-mail address bboybear1984@bellsouth.net. Thank you Barry Hayhurst

Still going to get some pics up. Ran into alot to do yesterday. And Just wandering is it possible that these are ford spindle on this car. I had a guy I know at a Value Brakes here take a look at the rotos and he said that they look just like a ford fairlane that he had in his shop not to long ago. But Is it possible to get everything to match up from a Ford ? I will do some research on that in the mean time. I have tried alot of other stuff.

I will work on getting some pictures up so you guys can see what I am talking about. The difference is in the back of the new rotors. I believe these are original spindles on this Delta but I do not think these spindles are original to this car. I think they came off of something else. I will get some pic up today and you guys can check them out. And I will get all the measuments and specs posted as well. Thanks again guys. Ohh and Rocket I would never put this boat on the road with no brakes. I do not think I could just put my feet out the door and stop this boat. lol.

I am located in Jacksonville Fl. And thanks for all the help you guys. I am just a 22 year old kid. I do not know alot about the older cars. But I want to fix this one up. And the bolt pattern is definetly 5 on 4 and 3/4 But I layed a 5 on 5 rotor/hub in the tire and it wil match up. So I guess it is a 5 on 5. But the hub is so different nothing I have looked at fits it. Because of the bearings in the back of the rotor/hub. The rotor hits the spindle before the bearings meet up right. I am not sure if you guys understand what I mean. But I am to the point of just putting the originals on it. Do any of you know where I can get the original Spindles, Rotors, Calipers. Pretty much from the spindles down. If any of you have any laying around I am more then willing to pay for them and for shipping. From what I have heard the 1967-1970 Oldsmobile Spindles are interchangable. If any of you guys have a set or know where I can get a set please let me know. Thanks again for all your help. I am not giving up on this car. I will have this car back on the road this month ( some how...lol ).

Ok I have mesured the back lugs as well. They are also 5 on 4 and 3/4. And I do not think the suspension has been messed with much. Nothing that I can tell. And the Spindle is definetly more than one piece. The steering arm is a bolt on. So this means that the spindles are from the 65-70. And the driver side spindle does have a speedo cable. So it is big body rwd olds from 65-70. How many options does that give me ?

I have yet to find anything that matches the bolt pattern on the hub. It is 5 lug and 4 and 3/4 inches . And the hub is deep like the hub from a utility trailer. If anyone has a huyb that matches that description please let me know. on here of e-mail me bboybear1984@bellsouth.net. I found spindles for a 67 olds. But I am kinda not wanting to pay $350 to try it out. When all I need is to find out what this rotor came off of. Please help. Bear

Ok I took the rotor and hub apart ( it is a 2 piece assembly, held on by wheel studs). The only numbers on the Hub are as follows : KH78515 And L86468R. And there are no numbers on the rotor itself. I have put around another 100 miles on my car driving around today trying to find this stuff. And still no leads. I am just about stumped as to what to do next. And yes the parts places have rotors for a 19070 delta 88. But they are no the ones on my car. The ones on my car are different. It is more the hub that is different then the rotor. The hubs look like they came off of a utility trailer. They are long. If ya know what I mean. But the only specs I have on the rotor is that it is a 12 inch rotor . That is all I was told I would need. Does any one know where I can find a set of spindles and rotors for a 1969-70 Delta 88. Cause I think I am about to the point of having to put a set of spindles on it. Cause trying to find out what car this rotor came off of is getting me no where. I hope you can help me rocket. Bear

Thank You I went to a Value Brake to see if they could tell me where the rotor came from. And they told me that it came off of a truck. They said a half ton truck somewhere near 1970-1985. But I do not know how many GM trucks were made between those years. Or what they where. The only one I can think of off the top of my head is the c10 and maybe 20. Do you know how many or what they were ?

Thank You I went to a Value Brake to see if they could tell me where the rotor came from. And they told me that it came off of a truck. They said a half ton truck somewhere near 1970-1985. But I do not know how many GM trucks were made between those years. Or what they where. The only one I can think of off the top of my head is the c10 and maybe 20. Do you know how many or what they were ?

Ok I have a 1970 delta 88 With a broken front brake rotor. I go to change the broken rotor. And I go to every autop parts store that has the part listed, but none of them are the right rotor. Not one of them will fit. So my only guess is that the rotors and spindles on my delta 88 are not the ones that came with the car 36 years ago. Which is not that hard to believe but the only problem is that I have no idea what car or what year these rotors and spindle are off of. Has any one run into this problem before. Or does anyone know any cars whos rotors and spindles would fit the 1970 delta 88. Or where I may purchase some spindle and rotors for a 1970 delta 88. Please help me out. I am absolutly stuck here. I have no idea where to go from here. Please help, Bear

Ok I have a 1970 delta 88 With a broken front brake rotor. I go to change the broken rotor. And I go to every autop parts store that has the part listed, but none of them are the right rotor. Not one of them will fit. So my only guess is that the rotors and spindles on my delta 88 are not the ones that came with the car 36 years ago. Which is not that hard to believe but the only problem is that I have no idea what car or what year these rotors and spindle are off of. Has any one run into this problem before. Or does anyone know any cars whos rotors and spindles would fit the 1970 delta 88. Or where I may purchase some spindle and rotors for a 1970 delta 88. Please help me out. I am absolutly stuck here. I have no idea where to go from here. Please help, Bear