-
Posts
50 -
Joined
-
Last visited
Content Type
Forums
Gallery
Events
Everything posted by Pitalplace
-
Thank you very much. Just what I wanted to know and I was on the right track. They have the tape at our local Menards. I was also looking at https://www.menards.com/main/paint/adhesives-glue-tape/tape/mounting-tape/gorilla-reg-1-x-60-heavy-duty-double-sided-mounting-tape/6055002/p-1474478957959-c-13186.htm Which is a mounting tape.
-
What is the best material to put between the fender and fender mount on a 1934 dodge truck? Also was there fender welt between the cab skirts and the fenders?
-
Here is a little progress on my truck. The box is done and most of the truck is done. It is all back apart for body work and paint.
-
The fenders and grille are at the body shop now but the cab is going to be later. Maybe this fall. No I haven't taken the sample and the dash piece to the paint place yet. I can if you want and see what we come up with. 308 650 1522 if you want to talk. Byron
-
Well we have 3 gauges, glove box and suicide doors. I would love to know when it was built.
-
So I have 1934 K47 2 ton with suicide doors but I also have the 3 gauges like below. I thought the 3 gauges were late 35 or later.
-
I tried to rotate this picture with no luck. Anyway I am looking for a passenger side mirror mount for a 33-34 dodge truck. This is the drivers side mount. If someone has one I am interested and any other ideas. Thanks
-
Sorry, I wasn't paying enough attention. Yes mine are hood side plates.
-
I have a couple old sets, not very pristine but probably work for wall hangers.
-
-
I am looking for a stainless center molding for a 1934 dodge truck. I see a lot for the fords and I wonder if any one has used one and if they are the same. SRPM wants $70 and I have found the fords for $24. This would help the budget.
-
I have found two good used hood sides, Thanks Byron
-
Where did you go with that load. That is awesome.
-
This is on my 34 K47 2 ton. The bottom of the hood sides are in bad shape. I am sure these do not have any repair panels made so I was interested in any ideas on how to repair. How would you reproduce the shape at the bottom? Here are a few pictures of what I am talking about. I do have the louver moldings to weld back in for both sides.
-
Thanks for the info and links. I was pretty sure it was a special tool.
-
So my question is how to get the pretty little curl in the back side of the rivets?
-
Found this on eBay and it should be on it's way in a few days. Between this sample and some existing paint on the truck I should be able to match pretty close. Thanks everybody for the help and pictures. It is neat to see the markings inside the cabs. 1930-1939 AUTO CAR TRUCK RINSHED-MASON PAINT CHIP SAMPLE KILTIE GREEN CODE 23494
-
Well it does appear that they wrote the paint on the inside of the cab. Looks to be the same type of marker if not the same hand writing but I doubt it. I just took a picture of the dash moulding with the paint waxed a little.
-
Thanks for the replies. It appears that Kiltie green was also used on 34 Nash's. I do have a very good example on the dash trim piece and a good paint store in town. I just think it interesting that no where in the paint codes or color charts it appears before 1937. Maybe it was a special order and that is why it was written on the door. Does anyone else have the original paint written on the inside of their doors?
-
My K47 2 ton truck was a dark green. I have searched the auto paint sites and nothing shows for this color. I found this on the inside of the passenger door and it appears to be Kiltie green. I would like to repaint this truck with this original color if anyone has any information. I am assuming it is a truck color as it does not appear in any of the 30 dodge colors.
-
1934 K-34 Dodge brothers 1 1/2 ton.
Pitalplace replied to Jason Tempero's topic in Dodge & Dodge Brothers
Yes mine is a 2 ton. They are basically the same except axles and springs. pitalplace@gmail.com -
1934 K-34 Dodge brothers 1 1/2 ton.
Pitalplace replied to Jason Tempero's topic in Dodge & Dodge Brothers
I am doing a 34 K47. I have the carb but it would have to be rebuilt I'm sure. I would guess that gear ratio is about right as these are geared very low. If you would like to talk about these trucks give me a call 308 650 1522 -
Thank you that is what I wanted to know. I will measure the channels. Byron
-
I am looking at the door glass U channel for my 34 dodge truck. SRPM has them for 3/8" and 1/4" glass. My glass is missing so what is normal? I am thinking the glass that came out of the rear window was 1/4" Thanks Byron
-
My error is corrected