oldstyle

Thanks for all the great information. You are correct about the just the center of the roof having a fabric cover. That is what I was talking about. This is on a 110. The metal surround looked more like a metal track that encircled the fabric. Seems like there was some sort of "tar" involved with putting this cover on as well. If your sure about the metal being round bar,then thats what Ill go with. I do want the original look. Ill take a look at that Elk grain fabic. Thanks again for taking the time for such a detailed explanation.

Hello, Does anyone know where to find the metal piece that holds the vinly top in place? Raul

Thanks John and ED. This is going on a 66 intake on my 65. I understand that the 66 carb is the only one that is the easiest to replace.

Thanks Ed. I dont have the carb yet. Im just going to start looking.

Anyone know how to id a 1966 Quadrajet? Thanks, Raul 57 Buick 65 Riv

Not many thin white wall tires left. What are you guys using? Brand and sizes would be nice. Or pics. I don't want big balloon tires or ones that dont look or fit right in the tire wells. Thanks, Raul

A the 57 and 58 steering wheels the same? Im talking about the the 3 bars and the rim. Not all the chrome pieces. Just the striped down wheel. Wondering If I can use a 57 wheel and just add all the 58 chrome pieces to it. Thanks, Raul 57 43 65 Riv

Try RARE PARTS. Some of the other companies will just take your center link and send it to them anyway. RARE PARTS in Stockton,Ca. Raul 57 mild custom 65 Riv

Thanks. I didn't see them listed in the online catalog. I sure miss paper!

Anyone know where to get these? The seat back sits on 2 of these small black rubber pads (keeps the seat level). Thanks, Raul 65 Riv 57 Special

Thank for all the help. I seem to missing the pointer. The hole is round with a slight indention. Would the pointer be at the 12 o'clock position? I'm just going to have to guess.

Where to put the timing light? I tried to check the timing on the flywheel-is that correct? Should the octane selector always be at 0? When would you change it? thanks for the help

Where to start? 1. Engine is backfiring from tailpipe and carb (new carb). 2. Seems to overheat. 3. Idles rough. I've changed the points,plugs,carb. I tried to set up the timing. How do I set it up? I tried to look through the hole below the starter. I cant see any mark. Even if there was one, what do I align it too? Threre isn't any mark or pointer near the hole. Whats the pointer (o to 10) below the distributer for? what should it be set too? It's set to 10. The car is my Uncle's but I'm trying to help. Anyone know a good Packard mechanic in Sacramento ,Ca area? Thanks for the help in advance, Raul

If your interested: oldbuick @comcast.net

I need to replace the starter on my 65. Anyone bought one from napa? If so, part number? I would like to find one locally if possible. Napa list several but I just don't know which is correct.

I bought these but never used them. They are NEW and still in the old yellow box they came in. Would be great for a restoration.

Kinda crazy to have to go through a online store just for hoses. I was hoping someone would have a easier way. Thanks anyway

Does anyone know the part numbers for a 1957 buick upper/lower rad hoses? I've tried having the parts store match a set up with no luck. What's everyone using? I dont mind having to cut up a set to make it work. Thanks

Thanks for the replies. The one on ebay is out of my league. Id like a driver that I can work on but would look at something a little less. 3Jakes: Wow. Lots of good info here. Exactly the type of stuff I need to know when looking. I assumed the sedanettes were basically all the same. I'll have to watch for a super or even better a Roadmaster. Auto trans would be nice too.

Thanks, they are both such great looking cars. Prices seem to be all over the place for both. Luckily I have time to wait because I still have my 57 4door hardtop to drive around. Thanks for the welcome. Raul

Thanks Derek for the reply. I'll keep looking

Anyone have any? oldbuick@comcast.net

I really like the 49 sedanette. What model are these? If I buy one, what should I look for and look out for? Thanks, Raul 57