ebak210

bmp

Horn Button Light switch Handle Door stopper (top of sedan door) Contact me on PM if you have any of this

bmp.

bmp...

Can anybody help me with this one? Placed on the top of the door. Thank you ebak210

Hi, I have a coupple of questions about the rear bumpers. A friend of mine have a 6 cyl 1924 Buick, and he could be interested if it fits. What is the width of the bars, and what is the width of the space between them. Do you have a better (closer) photo showing how to fasten it to the frame.

I have a 1928 Buick Master mod 50. My rims are Jaxon no 34, Black.

Old Buicks 2: PM sent

Who is the best parts supplier for Delco - Remy starter parts on my 1928 Buick? Number on the tag: 725-A 224868

Oregon Desert Model 45, FLYER 15015, and michealbernal, thanks. This is what I was looking for. FLYER 15015: Do you have a closer photo without the trunk on it? michealbernal: Im looking forward to your photos/info. Again, thank you all!

I have an idea about building a trunk platform on the rear of my car. I want to buy a suitable trunk, and I want to keep the spare tire (1), with the original holder behind the trunk. Does anyone have photos of how this can be done? I would be very greatful. My car is a 1928 Buick mod 50.

btt

I searched eBay every day in 3 years before I found one for my 1928 Master. That was about 6 months ago. Keep searching. Good luck

I`m looking for the horn button and the light switch handle on my model 50. The horn button was missing, and the handle was broken when I purchased my car.

Spinneyhill. Thank you for the answer. I will first try to remove the old cylinder, because here are no locksmith near by where I live. I have removed all the small parts, and then it looks like the photo. It is that piece on the top that prevents me to remove the bezel. I hope the old cylinder is not totally stuck, because I can see it moves a little bit when I try to turn it with my new key. Do you think my new cylinder is the correct one for this handle? Thank you.

Hello, I have a 1928 Buick Master with this locking handle, but I do not have any key for it. I m not sure if this is the correct handle for this car, but since all four handles are the same type, I decided to keep them. All doorlocks are working fine. The outside length of the handle is 4 1/4", the length of the handle included the axle is 4 13/16". A few weeks ago I bought a new locking cylinder which I hope is the correct one for this handle. It is a Briggs & Stratton cylinder. Outside diam is 5/8"( which is the same as the old one), inside diam is 1/2". Total length is 1 31/32". Can anyone who are familiar with this type of handles tell me if the new cylinder is the correct one for this handle, and how do I remove the old one without destroying anything ? It is in the "locked" position, I have removed the small parts inside the escutcheon, but are not able to remove the escutcheon itself because of the locking piece sticking out of the axle. Thank you!

I m going to change the transmission oil. Does anyone know how much oil I need on transmission and rear axle? What type of oil do you use?

I visited the new owner of this car the last weekend. The Pedersen is a nice small beauty.

Dave_B. Today I was trying to push the wire you very kindly sent to me, a while ago, up into the housing from the gas tank end. Im sure it is the correct type wire, both thickness and quality, I compared it with a small piece of the old wire remaining in the housing. But I must have dome somthing wrong, the wire would not go through. The hole in the tank end is VERY thin, so it was impossible to get the wire in if I folded it. So I tried without folding it, but it stopped about halfway through. I tried so many times, that the wire you sent me, now is destroied. Do you have any idea what Im doing wrong? Do you still have more wire? If yes, could you send me another? But now I want to pay you for it!

John, email sent BR ebak210

....

I just purchased a 1928 Buick Master mod 50. The car misses the outside sun visor, and I will try to make a new one, with new aluminium edges. I just got a pair of supports via ebay. Can anyone provide me with measures etc. Or maybe a close up photo. Thank you.

Hi, I found this 8 years old posting. Is there any possibility for you to produce new water outlets now? I have a 1928 Buick master with 4 legs on my outlet. I live in Norway.

Hi, just sent you a PM

Thank to Leif and unimogjohn. Anybody else who can help?