Jump to content

canadawindsor

Members
  • Content Count

    27
  • Joined

  • Last visited

    Never

Community Reputation

0 Neutral

About canadawindsor

  • Rank
    Junior Member
  1. Can someone tell me where the proper brake fluid level should be on a 61 Chrysler with power brakes? Currently, the level on mine is approximately 1" below the rim. Thanks
  2. My 361 is worn out and I am looking for a replacement. A rebuildable short block would be my second choice. Thanks Ray
  3. What is the difference between an "HC" and "HP" designation on a Mopar big block? I know what the acronyms stand for but I don't know the exact differences in these engines. Is there a difference in: compression? cams? valve train? Thanks
  4. I am looking at a 383 that supposedly came from a 66 Sport Fury. Is there anyway to determine if it is the higher compression 4bbl engine by casting numbers, etc? If this is not possible, can I pull a head and easily determine the compression ratio - dish, flat vs domed, etc? Thanks
  5. I have late 60s/early 70s slotted road wheels on my Chrysler. The wheel bolts I have are not very attractive. Does anyone know where to find chrome metal snap on caps for the 3/4" bolts or the more costly option of finding LH and RH chrome bolts? What did these wheels have originally for wheel bolts? Thanks
  6. These parts were taken from a "driver" with 65,00 miles. We pulled engine for a Cutlass project. Bumper has jack dents. $200 for all or make an offer on individual parts. Shipping/packaging will be actual cost based on your preferred method. I can provide more images if required.
  7. The Canadian brochures included the Saratoga. Thanks Ray rbohn61@comcast.net
  8. I stopped at 4 different parts houses yesterday, including NAPA, and none of them knew what I was talking about regarding motor oils with sufficient Zinc content. It seems as if I am training them everytime I visit to buy something.
  9. I found 3 holes on each side of the frame that match up perfectly with front brackets for a sway bar. I found the bolt-on brackets from a 63 Chrysler at a salvage yard this weekend. The bolts that were installed have extremely fine thread. It appears that the mounting holes in my frame do not have threads. Does anyone know if these bolts are self tapping and if so, how do I make them work? I now have accumulated the bar, all the hardware, brackets and bushing to install, but I am stumped regarding these bolts. Thanks
  10. Has anyone found a good source for 60s windlace. I am looking for blue with the plastic weave material. Thanks,
  11. 61 tank listed on ebay http://cgi.ebay.com/ebaymotors/1961-CHRY...sspagenameZWDVW Have you found one yet? Ray
  12. http://www.classiccarautoparts.com/gastanks_dodge_plym.html These folks seem to have a lot of older mopar tanks to choose from. See page 2 for 70 Plymouth.
×
×
  • Create New...