Jump to content

Old26Buick

Members
  • Content Count

    349
  • Joined

  • Last visited

Posts posted by Old26Buick

  1. I have an intake and an exhaust manifold for a 1927 Buick standard. The exhaust has a bolt hole on the very front and the very back, some had this and some didn't. Like to get $125 for both plus shipping from Falmouth, ME

    I can e-mail pictures.

    Steve

    • Like 1
  2. I need the rubber wheel liners for both my 26 Buick and 27 Buick. The old ones are a little under 4" wide. Al I can find is 5" wide liners which I think are too wide. I;m using 600 -21 tires on the 26 and 525-550-21 on the 27 Buick. Does anyone know where to get the correct liners?? Thanks

  3. Has anyone worked on a EA power horn Model F made by EA Laborators .

    I have a horn made by them that I'm planning on using on my 27 Buick. The motor end works fine but no sound. Looks like vibrating part needs work. Thanks

    Steve

  4. I have a 26 Buick which i put a shut-off valve at bottom of vacumn tank. Later on I found a fellow in CT who made me a seat with viton tip. Worked good. when I rebuilt the motor I turned the intake upside down and used a single barrel stromberg down daraft carb with electric fuel pump. I know its not orginal but sure works super. i have done the same to my 27 Buick woodie.

    Just my thoughts.

  5. I'm going to have a new roof installed on my 1926 Buick Standard 4-door sedan. It doesn't have the correct moulding. What should it have on the rear and sides?? Did it have any on front or should roof material be tucked under sun visor. Would like to get some pictures and source of moulding. THANKS

  6. I have the front floor boards out of my 27 Buick Woodie which was a 27 Buick Model 27 (Standrad 4-door sedan) I also have a 26 Model 27. I'm going to make new floor boards for the front of the 27 and can make your some patterns or send you my old boards. These are just the removable floor boards in front. e-mail ssmith105@maine.rr.com.

    Good Luck

    Steve

  7. I;m looking for an inexpensive car cover, only need to keep dust off my cars. About 34 years ago I bought a nice soft car cover from J.C.Whitney and am still using it today. Does anyone know where to get a nice soft cover?? Thanks

×
×
  • Create New...