Jump to content


  • Posts

  • Joined

  • Last visited

Everything posted by rofly1

  1. I was able to locate one in New Jersey at Berger Automotive Group Ocean Township 732.918.1100 $10.30
  2. just called local caddy dealer and says that part has been discontinued by general motors
  3. Thanks Hemi for all of your help.
  4. i checked through the service manual and there is little information. Would the whole unit need to be replaced or can the voltage regulator be replaced? Thanks
  5. I just got a code 46 battery overcharging and the battery guage is maxed. Is there a voltage regulator? I have an 89 dohc. I can use some ideas Thanks Roger
  6. Hi Hemi, what kind of led lights did you use? thx roger
  7. the only difference is the color of the tint at the top
  8. I had safelite install mine a couple of years back the sun tint at the top is a different color but it was watertight. Good Luck
  9. Rick Diogo rebuilt my 16v and installed an analog boost/vacuum and a digital air/fuel mix Roger
  10. i would be interested in one thx roger
  11. I believe it will only be a matter of time. I have two tc's and one heater core is bad
  12. I am interested in a set in ginger. Can you get a sample of the leather and color? I know where the leather comes from (cow) is it domestic or imported? An exact match, I think, is relative to the individual.... thx Roger
  13. is the black the only color option? thx roger
  14. ghosty, my mistake 203047 and 204447 thx again roger
  15. Hi ghosty, first thanks for all the time you have in putting this together. i have two tc's the beauty and the beast 89 20347 royal cabernet/ginger/tan now black 8v SOHC no yes yes 89 20447 yellow/ginger/black 16v DOHC no yes no roger
  16. i also have the guages. they all work except for the odometer thx
  17. hi, i have a black face (non woodgrain) cover. it is what i would consider pristine for its age. all guide pins are intact for installation. the leather is very nice. pm me for a price
  18. Tip: When locking down the convertable top do the rear lockdown first. Then lock the windshield latches roger
  19. I spent little over 6 a year ago for my 16v. Then proceeded to replace the clutch, all of the hoses and belts, plugs, wires etc......additional couple of grand....oh well a cool little car Roger
  20. I am going. My first trip to carlisle. Roger
  21. Hi, Are all of the plugs still in the door mouldings? If so, I am interested thx Roger
  22. Hi, the manual way is to use the lug wrench or 3/4 socket and insert it thru the carpeting in the trunk right below where the third brakelight is located. Do not force the nut or it will snap. gently turn clockwise to tighten the pins. turn counter clockwise to loosen the pins. I would highly recommend to get the pull down fixed because the manual way wont work forever. Amen Roger
  • Create New...