Jump to content

63viking

Members
  • Posts

    2,869
  • Joined

  • Last visited

Everything posted by 63viking

  1. Yes, the cadillac one that looks like the Reatta fob will work. Just program it like it was for the Reatta.
  2. If you dislike it so much, get rid of it.
  3. Jim, I had the same probleme a few months ago. I also replaces all sensors with no luck. Check and adjust your TPS reading, THen check the resistance of your IAC. Mine was new and it had a bad reading on one side. Good luck.
  4. I wonder if he still has the Reatta engine. The first pictures are of a Grand National engine. Valve cover hold downs are completly different on the normal Buick engine and the heads are Not interchangeable.
  5. Have you run the test that is on the page you posted?. Second paragraph from the bottom. Check the coils A&B and C&D with a voltmeter on resistants.
  6. I had a bad connector and a bad IAC. I checked the connector first and replaced it. Then checked the IAC with a voltmeter. The readings are in the manual. and found one side of the IAC was bad. Replaced with another and all is well.
  7. I just went thru the same problem. Replaced all the sensors and still had the same problem. !st make sure the TPS is set correct. Then remove the plug form the IAC and check the readings using a voltmeter. You can find the readings in the manual. I had a new IAC and half of it was not working. I tested anther and found it to be good. It solved my problem.
  8. Get a large plastic cup, larger than the filter. Crack the filter loose and then put the cup over it and remove. The hot oil stays in the cup along with the filter.
  9. No, I mean what does the code mean?
  10. It is history. I just don't know what it means.
  11. I got an error code B552. When I looked it up the comment was "Memory reset indicator". Any idea what that means?
  12. 8D-16 override displays. ES09 IAC motor. But how do you lock it in?
  13. Using the computer, I cut down the idle to where I want. Now how do I lock that setting in so it won't change when I restart it.? Please anyone.
  14. Still having idling problems. When the A/C is on the engine idles quite fast, around 1300 to 1400 rpms. When the air is turned off the idle returns to normal around 750 to 800 rpms. What sensor controls the idle when the air is turned on and off? Anyone?
  15. I'm thinking that you have the wrong ICM. Check the plug against the one in your other car that runs.
  16. Most boring color combo "RED & TAN interior.
  17. Come on you young whippersnappers. I' 83 and I just pulled and did some work on the engine in my Reatta. It's going back in today and tomorrow.
  18. I have a standard one if you like. Is the select 60 one dufferent?
  19. Anyone out there have a quick, easy way to turn on both fans at high speed when needed?
  20. I am having the same trouble with my cruise control, only mine works the first time you turn it on. Then it seems like when it warms up a little it just drops out. I have checked the system and replaced most all of the parts with no luck. I do have LEDs and regular bulbs in the third brake lights and in the tail lights.
  21. This the information have been looking for . I have been trying to figure out why my cruise will not work. Mine seems to work until the engine warms up, but it could be until I use the brakes the first time. I do have LEDs in my third light.
  22. IF NO ONE WANTS THEM, THEY WILL GO IN THE GARBAGE Fog light covers are sold. Right and left headlight brackets, make offer, you pay shipping. One new headlight bucket, make offer, you pay shipping.
  23. IF NO ONE WANTS THEM, THEY WILL GO IN THE GARBAGE I have a 90 Gray steering wheel for sale Good condition, Make me a offer, you pay the shipping. I also have R & L rear speaker covers,saddle color make , me an offer, you pay the shipping.
×
×
  • Create New...