Jump to content

jim f

Members
  • Posts

    35
  • Joined

  • Last visited

    Never

Everything posted by jim f

  1. Hi does any one know where to get a license plate lens fo a 1933 dodge coupe?will take plastic till i find a glass one thanks Jim
  2. Thanks Harsh.that is for a truck ,not the same but thanks im still looking Jim
  3. Hi ,thanks I can not find that number in ebay store 453961107 . I did a search but does not come up thanks jim
  4. Hi, Do you have a license plate lens ? I might have a ring I will have to look. thanks jim
  5. hi looking for lens for license plate light ,any one know where i can get one?thanks Jim
  6. I believe the spit fire engine is a 41 would like to see if it fit my 33 dodge thanks jim
  7. dose anyone know if crysler made a spitfire engine and if it is the same block as dodge,are the parts interchangable ? thanks Jim
  8. Hi a good radiator shop should be able to recore and repair your radiator,they can put extra row in it to carry extra coolent for streetrods,they can change where the hose connections are also .good luck Jim
  9. Body shop recommends doing patches before you remove body,take care where wooden blocks and rubber pads are, make sure they go back at the same place take pictures so you know how they go.when you put body back on you may have to adjust it with shims to get door to close right.you will have to bolt the body down tight to make sure you have it right.I just completed my 33 coupe body, I put patch panel on before it was taken off .good luck
  10. HI I might have one of those ,I believe the number on it is 615 It will take a while to find it, let me know if your interested Jim elevdoc5@aol.com
  11. Hi ,you can get them at hardware store there 3/8 X 24 thread brass nuts. good Luck Jim
  12. sorry ,looking for wire wheel hubcaps Thanks Jim
  13. Hi,Im looking for hubcaps for 1933 dodge coupe or where i can have them repaired thanks Jim
  14. Hi you can try restoration supply company www.restoratonstuff.com ,or Restoration Specialties & Supplies Inc. www.restorationspecialties.com , if they dont you can sandblast s.steel It will give same affect. good luck Jim
  15. Hi, I am looking for paint colors for 33 dodge engine compartment. I believe engine is silver ,what color are the front mounts,tran,starter & gen.,manifold intake & exhaust , any info will help.Thanks Jim
  16. Hi Rodger, try to take off bakerlite disc off of steering wheel if I damage it I was wondering if they make a replacement.Any suggestions on removal I have to repair horn wire. Thanks Jim
  17. Does any one know if bakerlite center is available for 1933 dodge steering wheel an where I can get one thanks Jim
  18. Thanks Rodger I will give it a try don't want to damage anything Jim
  19. does any one know how to take off horn button on 33 dodge need to rewire horn thanks Jim elevdoc5@aol.com
  20. Hi.I just found pattern for panels for rumble set interior panels I you need them please contact me Jim
  21. HI, I am looking for sum visors for 1933 dodge coupe .I need the hardware for the right hand side .The piece I need has the three holes that attaches it to the valance panel can any one help? thanks Jim
  22. there is a vacuum line that come from center of intake above heat riser to other side of engine.it is attached to a pin at the base of block. a rod come out of this unit goes to an arm on clutch linkage .also has a cable that goes to free wheeling hope this helps thanks Jim
  23. HI Hank does this motor have an auto clutch and linkage from clutch pedal to auto clutch if it does will you sell it thanks jim
  24. HI I'm Interested let me know what you are looking for it .contact me elevdoc5@aol.com thanks Jim
×
×
  • Create New...