JoeKramer

The body I have has a number stamped on the fire wall. Is this the serial number? I am building a hotrod with the body and I want to get it titled as a '21 Dodge Brothers Touring car or roadster truck. Its going to be remade along the T-Bucket style of hotrod and has been cut down from a 4 door to a 2 door. I was even thinking of stamping in the # into the new frame also. Thanks guys!

'21 and ealier... HELP! LOL

NM

Looking for 2 complete front doors. Hinges and locks. Here is a pic of what I have to ID the doors I'm looking for. If this is a rear door then I will still want both front doors. Thanks!

I would like to match this passengers door. I'm not sure if its a front or rear. But anyways if its the rear then I would still like fronts I think. I also would like all the hardware for the hinges and the locks if possible. Thanks I did have a bite but the guy isn't writing me back. hehe <img src="http://www.aaca.org/ubbthreads/images/graemlins/smile.gif" alt="" />

You can get an ok bead roller from Harbor Freight. Its on sale right now for $89. If you order it you will not have to pay for shipping, but they do have a $5 handlening fee now. Bead Roller at Harbor Freight Now if your just looking to make straight bends in metal you want a Sheet Metal Brake. They very in length and how thick of steel you want to bend. The best kind is a Pan & Box Brake, this will allow you to do corners and will allow bends much farther than 90%. Harbor Freight has them to but they tend to run into real money. They even have combos, you can get a combo shear, brake and roll. If you need all 3 of these things it might be a good way to go. I have the bead roller and will be getting the 48" Pan & Box Brake soon. Now if you want to make 90% bends in a curve, like the lip to a fenders wheel well then you can get a sheet metal Shrinker - Strecher from a company like Eastwood Company. They are a bit up there, like $300. Hope this helps! Look in hot-rod and custom mags for books on metal fabrication to.

I'm looking for all of the door. Door and hardware, even the micky mouse stuff. LOL Go ahead and write me with your contact info at my work E-Mail at joe.harrison@ed.gov Thanks

Mostly I'm looking for the front doors, hinges and door hardware. I have the passengers front door but its really rusty and have no hinges or hardware. I don't have the whole car, I just bought the body from a guy who stated that its a '21 Dodge Brothers. Someone had chopped it down to have 2 doors and front + back seats. I assume they had or where going to put in bucket seats. The thing is in really rough shape though but I used to be a body guy and can handle it. I am doing this as a custom roadster pickup, not a T-Bucket, but close. I'm thinkin of makein a 4 foot long bed to house all the stuff like gas take, battery, sub woofers/amps and extra storage. I'm going to make a custom frame for it baised on CCR (California Custom Roadsters) plans. I am currently trying to track down a good running 318 Poly/Wideblock and automatic trany to. The Poly block will probly get lots of questions like 'What the heck motor is that!?!?!' LOL Here are some pictures I took when I got the thing home. It cost me $100 for it. Here is the link to my page. I don't have much up there for this project yet though. Dodge Brothers Bucket page Thanks guys!!!

Sent ya an e-mail askin what ya have! Thanks!