Jump to content

hddennis

Members
  • Posts

    2,167
  • Joined

  • Last visited

Everything posted by hddennis

  1. Picked up these twin coils today and would like to know what they fit. Quick search turned up the number 1854015 fits a 1934-1937 Cadillac V16. This set hs the number 1854011 on the diecast bottom which I think might be a Delco number so maybe this fits an earlier V16 > Thanks for any help, Howard Dennis
  2. Soo...., No Switch ?? Howard Dennis
  3. Check Here:https://www.wcra.org/engine-374/ Howard Dennis
  4. Thanks Pat, I have the pedal and mount just need the switch. Howard Dennis
  5. Possibly. This is what the whole thing looks like. Howard Dennis
  6. Pat, since this is an accumulation of Maxwell parts would you have any of these 1916-1917 starter switches? Thanks, Howard Dennis
  7. That makes it a mid year 1917 engine. Howard Dennis
  8. Aftermarket Atwater-Kent but appears to have the wrong coil. Howard Dennis
  9. Check out the break-in routine on the new 1918 Maxwell: Howard Dennis
  10. From what I could find the majority of Rayfields were aftermarket, would depend on what the model is as some were factory mounted on a few cars. That may be an original coil as 1918 was the first fully 12 volt Maxwell's. My late 1917 has 2 6 volt batteries, starts on 12 runs and charges on 6 volt. Howard Dennis
  11. That Rayfield carb is not the original. 1918-19-20 all show a Johnson carb. I'm out of town till next week but know I have some, might make you a package deal to take them all. Howard Dennis
  12. Supercub, forget about looking for a Jaxon rim. If I'm seeing correctly your carhas the odd wheels held on by 3 bolts. I can't seem to prove or disprove if these are factory mounted. I can't find any literature that mentions them other than aftermarket listing of the period. So they could be factory or dealer or owner installed. yours is about the fourth car I've seen equipped with them. Howard Dennis
  13. Great! Glad to see another Maxwell rescued. Get any spare parts with it? Howard Dennis
  14. Definitely Maxwell engine from 1916-19. What is the motor number stamped on the boss just behind the water outlet? Howard Dennis
  15. Judging by the gas tank filler and windshield mounting post I'd say this is a 1918-19 Maxwell. Check the serial number to find out exact year. Howard Dennis
  16. I'm not seeing anything?? Howard Dennis
  17. Rims should be Jaxon and turn up occasionally. I have used Model T Ford rims by knocking off the lugs in a bind but they lack the anti-spin indentation. Howard Dennis
  18. From your picture I can see the carburetor is not original but they come up on eBay often. Howard Dennis
  19. Some 1916-17 Maxwell's left the factory with over hardened ring gears and started shedding teeth almost immediately. It took me the contents of 10 differentials to get enough good parts to restore my rear end. The dash panel with cutout and regulator, starter/generator and starter switch are more complicated than most period cars and replacement parts for these are very hard to find. If your car has a Simms magneto look inside the frame rail next to it to see if the intensifying coil is there. I have only ever seen one. If your car is missing the coil I'd reccommend replacing the magneto with the later Atwater-Kent distributorand coil. There is one on eBay right now. Yes the spare is a clincher rim with tire installed. There are some Maxwell's that have an odd complete wheel that is held on with 3 bolts and require a complete wheel and tire combination to be carried. Howard Dennis
  20. Since he hasn't been back after the original post and hasn't responded to my suggestion to recheck the serial numbers I'd say he expects anyone interested to call the number. Glad he's not handling MY estate. Howard Dennis
  21. Bob, I don't know the make of car but might this also be a car with a factory installed Kellogg tire pump? Howard Dennis
  22. You need to check the serial numbers as both are 1922 or later. Howard Dennis
  23. Nice find! Looks just like mine. Howard Dennis
  24. Most brass era adds for aftermarket cutouts tout them as both performance and testing devices. Howard Dennis
  25. Here's more details from an earlier post: https://forums.aaca.org/topic/307691-vacuum-tank-problems/#comment-1722451 Howard Dennis
×
×
  • Create New...