Jump to content

mick dodge 1927

  • Posts

  • Joined

  • Last visited

Everything posted by mick dodge 1927

  1. I Have a new set of champion 1 COM plugs Would they b suitable for a 1927 Dodge
  2. Would it be OK to use Champion 1 Com plugs in a 1927 Dodge Thanks Mick
  3. G Day Doug Try Vintage and Classic Reproduction Vintage and Classic Reproductions - Dodge Parts Mick
  4. G' Day Jason Still trying to get it rewound here Could you please give me an price on what it would cost including postage to Australia Thanks for your time Micheal
  5. Thanks For the advice Generator stopped charging I had 2 spares but couldn't get them to charge. So I got them checked all 3 had the armature burnt out. So I'm looking for some one to rewind one or anther good armature.The joys of owning old cars. Mick
  6. Could any one please tell me which position the 3th brush goes in a 6 volt north east generator. i have been trying to fix it as it wasnt charging and didn't realize that there was a difference in the bushes. I have 1 thin and 2 thick bushes I'm guessing that the thin one is the 3th bush and goes in the slot that adjusts. thanks Mick
  7. Hi Tony That Dodge climbing out of Queenstown belongs to me. I restored it about 9 years ago and was worried about the noisy first and second gear a old friend who has been around cars along time told me not worry about as the were always noisy. So I used it like that until about 9 months ago when I fond another gearbox I rebuilt it with new bearings. It is still noisy in first and second But not as bad. Drove it from Hobart Tasmania to Adelaide South Australia and back Never missed a beat. I will upload another clip to YouTube soon
  8. Im going to change the oil in my 27 dodge Is advisable to remove the sump and clean the oil strainer? Thanks Mick
  9. How often should the oil be changed in a 27 Dodge Thanks Mick
  10. Hi TonyAus Tried Auto One, Repco, Bursons And Super cheap none of the stock Penrite Classic Coolant. Where do you get it? Thanks Micheal
  11. Hi what coolant would you use in a 27 Dodge?
  12. HI It was a steep windy road out of Queenstown. The van was slowing me down I think i scared him into pulling over to let me pass. always thought that you guys drive on the wrong side of the road.
  13. My 27 Dodge leaving Queenstown Tasmania Aus
  14. Thanks Ben Fixed the problem. Had put in new bearings. What i did was put a 2 millimeter spacer in front of the rear bearing and it hasn't jumped out of gear since.
  15. 1926 1927 1928 Dodge Graham Brothers Carburetor four cy: eBay Motors (item 220686936149 end time Nov-22-10 09:50:32 PST) on ebay I think it its the one you need
  16. Hi How can i stop my 27 Dodge from jumping out of third gear when going down hill? Thanks Mick
  17. Hi would a 3 speed gear box from a late 27 dodge with an exposed tail shaft be made to fit an early 27 dodge withe a torque tube thanks Mick
  18. Hi I have a friend that requires a wiring loom for a 39 Buick. Does any know of a good place to get one Thanks Mick
  19. That's good. So I'm guessing that you are bidding on it Good luck Mick
  20. Hi There is one on eBay for a 25 Dodge not sure if its the same 1925 Dodge Brothers 4 Blade 17 1/4" Fan and Mount : eBay Motors (item 140383795517 end time Feb-20-10 12:57:59 PST)
  21. Hi Ted were in Australia are you? I'm In Tasmainia and have a 27 Dodge. It took me ages to find a set of 20 inch disc wheels you might try getting in contact with the Dodge Brothers Club of Australasia. some one there might be able to help you. Mick Dodge Brothers Club of Australasia (Inc)- main_index
  22. Hi Tom Myers has them new Nickel Plated $8.50 each look great got a set not so long ago Myers Early Dodge
  • Create New...