mikewest

Call Mainley Magneto in MAINE Google for number They do great work.

Very Sharp! and the right color for me!

Why remove them ? You need the correct number size drill bit to run through them to make sure they aren't stopped up, and blow out with compressed air. They most likely are threaded and are a bitch to get out . Your parts carb will need to be drilled out. If you don't have the correct tools to restore this carb , you should send to a professional to restore.

John, Im not sure on the history or even who actually made it. I saw it advertised last year and went for a ride ,with the truck and trailer w/ winch and this is what came home. I like it but really don't have time to monkey with it. I toyed with the idea to make it into a tow behind camper also. I hope it sells on Ebay. My reserve is set at $2000.00 Mike

Matt I see you are a Buick man. I have a extra NOS door molding for a 1947 76C . Do have a need for one? Mike

Im selling a 1935 Graham Housecar Camper. Its almost as rare as a DOTO BIRD (Doto birds are extinct) and Im sure this is the only one in the world! Check it out on Ebay # 172605907519. It can sit as long as needed until pickup as long as paid for per auction terms. Call with questions Mike 585 738 1541

The one on the left in top picture looks like aDodge Brothers 20s era. The square end removes the plug in the end of the oil pan so the crank can be inserted.

I check 2 different original side draft motors and both had high cap screws with lock washers, I checked a original 29 down draft and it had high cap screws with holes for wire. Mike

Hi Layden, what do you have in a early 6 cyl timer or distributor? Hope all well Mike West

I have a friend that will run the VIN # for me and search New York current registration's . Maybe its still in NY and on the road.

Still looking for a 6 cyl timer for this Wisconsin. I have the mag and mag shelf but want to run dual ignition. Can anyone help? Mike

6 more tags were mailed out today!

Bud - Must be!

I have a Model J glass body, hood panels and fenders for sale it anyone is interested in building a car. $750.00 Mike 585 738 1541

Pete What size are those lenses?

What do you have for Franklin 1929-34?

sold

More tags to sell. Everyone so far is very happy with the tags. Mike

This is a fresh to the market a very clean Wayne 60 gas pump. This pump was hooked up and working . Its been in a building for decades and not out in the weather. The glass and signs are original and very clean. The enamel face looks great . The pump in located upstate NY . Call Mike 585 738 1541 $3000.00 I can ship on a skid or get to PA shows free.

Selling 4 screw on 1930 and 1 1931 Franklin caps . The 31 looks NOS but has a crack in the thread area The 1930 caps will polish nicely! $50.00 each postage included. Mike West 585 738 1541

I have a pair of these 1931-33 headlights marker Parabeam on the light body and the lenses, They have a grommet for a badge bar to go between them and a blue/green jewel on the outsides. They attach to the light bar with a large nut and looks like they had a chrome sleeve that went verticle down to the frame for the wires to run up through like a 31-32 Franklin or other early 30s cars. These are a real mystery to me. Any help would be appreciated. Mike

This sidemount cover came to me with Franklin parts. I know its not Franklin. Any ideas? The center hole measures 19 1/4 inches, The diameter across the back is 28 inches and measure inside where the tire tread would fit in the center is 30 inches. Notice the finder hooks to assist installing and removing the cover.

Its listed in the roster of the franklin club -the owner.

I need one new or very good condition used white wall tire that has the extra white ring like shown in the picture for this car. I have 5 like new. Please contact Mike at 585 738 1541 mawest729@gmail.com. Thank you!

The bore diameter is 1 3/8 inch where it goes into housing that holds this lock. The distance from the underside of the cap to top of the dogs that engage the housing are 3/8 inch . Th OD at the top of the housing is 1 7/8 inch . Im not selling this exact one as the keys are Franklin script but I have many more. The locks with no keys(you get the keys made) are $125.00 The locks that have keys and work perfect are $200. They are all made by OAKES>