mikewest

Thank you for your efforts! Mike

I have jugs and heads as well original copper head gaskets in gd condition if needed. Mike mwest729@aol.com

OLDSTUFF, Plesae give me a call or a email Thank you Mike mwest729@aol.com

Gdenton, I think the good people are more concerned with lost lives,homes ,jobs and everything they own at this time.

Old stuff I sent you a PM ,Mike

How much are you asking for the car?Mike

Hi Bob ,Im looking for a complete rear axle assembly. Can you still help? Mike 585 738 1541

Glenn Ill take the monocle .I have a friend with a small brass car that can use it .Im still waiting for a reply from machinist .Thank you Mike

Pete I dont have one at all but If you could PM me your ph # Ill call you or you call me at 585 738 1541 anytime until 10 pm evenings .You arent far away,I could pickup soon.!! Thank you Mike

Sorry that will not work Mike

ODAT, I have a fair supply of hubcaps,as well 29-34 Franklin parts . Email your needs to mwest729@aol.com Mike

Wanted early style rear axle for a Dodge brothers car. Please email Mike at mwest729@aol.com Thank you Mike

Now Im looking for a complete rear end assembly,the early style with the suare end axles(full floating) .Please look in the shed! I have surplus to my needs nice wooded spoke wheels and 2 rims 24 inch.

Thanks everone I was able to get springs from DB RACER Mike

Glenn ,If you find a source or get some cast,Im interested also Mike West mwest729@aol.com Thank you Mike

Layden ,I have a wonderfull original 32x4 wheel ,no hub,with all hardewarew as shown above. ,square wood fellow ,12 round spokes,was a front wheel,with 6 of each as shown hardeware pieces .The fellow band is perfect ,Never any rust .Mike West 585 738 1541

FOR SALE Rear axle assembly for model 19 Buick Mike West 585 738 1541 mwest729@aol.com

I have a rear from a mo del 19 Buick for sale . contact Mike West 585 738 1541 NY mwest729@aol.com

I can also use any 25 inch wheels in the same configuration.(quick detach/demountible) I only would need one of these.

Ron, Ive run a 1930 Franklin I own in extreme heat situations with a 4 parts gas to 1 part diesel with good results. No smoke , no plug problem and no vapor lock. It works! What also works is to add a t in the fuel line at the carb inlet and run a smaller return fuel line to the tank. Really quite easy to do ,with good results. Mike

Is what you have for sale? Mike

I would like to know what the wheelbase is ? Measure from center to center on the axles. Mike

Bob I have a pair of Model t jack stands tha I made out from t housings when I was a young man.Stop over and we will measure......second thought Ill measure now and call you Mike

Ive replaced the wires before by drilling out the old end it the stem of the knob and silver soldier the new wire inplace.

ODAT-Youve got it ,disconnect and pull cable through dash,Pull cable from housing and take to your plater .