-
Posts
4,650 -
Joined
-
Last visited
-
Days Won
25
Content Type
Forums
Gallery
Events
Posts posted by buick5563
-
-
Much better, Chuck!
-
But not in Park.
😁
- 1
-
I’ve never used BaT.
Is it at all line eBay? Do people just wait and snipe at the end? -
Kinda looks like my junk drawers too.
😁
I have several of those bezels now Lamar.
- 1
-
Bernie, you have leaches on that seat up near your head. Watch out.
- 3
-
The main problem I have experienced is if there are too many cushions surrounding your tank, you will lose the ground for your gas gauge. With that said, I have used bike inner tubes sliced lengthwise so you couldn’t see them from below so there is no movement THEN I had to ground the sender separately.
- 2
-
Good luck.
I welded the tie rod ends.
- 1
-
I have used both. I know for a fact they have brake line kits for your car. I usually use SS for brakes and OE for fuel. I don’t really know why.
- 1
-
I agree with John D. I have had wheelcovers fly off. If they flew off again I replaced them. I think it is a hubcap problem not a wheel issue.
- 1
-
Inline Tube is the only way I would do this. I have never had an incorrect pre-bent line from them.
- 2
- 1
-
The hunt is ALWAYS more exciting than the repairs.
- 1
- 2
-
I saw that one. It certainly makes restoring one at this point not a sensible decision. A lot of 53’s available too.
-
Every time I see some of this expert rigging, I want to admit it was me.
I used the super glue. I welded the flapper open. I hope you sell the car back to it’s old owner so I can undo some of YOUR work.
😘- 1
- 3
-
I’d take it. I like the seats. It’s a TBird pattern.
- 1
-
For those who don’t know the car, it is a low mileage car, but it lived in Texas it’s entire life. Under hood heat in the sun fries plastic. Even while sitting.
-
An American assembled that spring spaced rigging. Just saying.
-
What the Heck? Those look like plumbing parts.
I would personally just order 2” lowered springs. I have 1.5” on my 55 wagon and it doesn’t drive any differently than my stock 55. I’m not a senior , but I’m closing in.Does AARP count?
-
-
Good eye @56buick,
There are indeed jack stands under the front and back.
- 1
- 1
-
-
It won’t matter on a full framed (55 Century) car.
A Riv or something with an X frame won’t work on short armed lifts. -
Didja see Auburnseeker’s question above? If I had a Wildcat, it wouldn’t do me any good if it was from a Special. And vice versa. At least a measurement.
-
NAPA or Oreillys should have a new cylinder in stock.
Rockauto.com if you live in the country- 1
-
Thanks Barney
Does anybody live in or near San Antonio Texas
in Buick - General
Posted
It’s an hour south of here Rooster. I have emailed him to see if it is still available. It is for a big nailhead, do you have a 401?